- Out-of-Stock
A set of spacers and connectors together with PCBs for the expansion of the Pololu 3pi robot. Black PCB in a version without cutouts for the display and connectors.

The expansion plate adapts to the chassis diameter of 3pi and is mounted just above the wheel tops with the four attached screws and spacers. Once assembled, the circuit board has electrical connections with the base, which allows you to connect your own electronics with a 3pi robot. These connections provide access to the ATmega168 LCD contacts, ISP programming contacts and free/shorted contacts, as well as to three voltages: VBAT (battery voltage), VCC (regulated 5 V) and VBST (regulated 9,25 V, which is supplied to the motors ). In addition, the expansion board connects to the base's power button and battery charging port, allowing you to add your own power buttons and charging ports.

This version of the kit may be better than the version with cutouts for those users who need additional I/O lines or additional space for prototyping and do not need an LCD display.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Kit to expand the Pololu 3pi robot to Pololu m3pi with a mbed socket board. Includes non-soldered PCB as well as necessary connectors and components for self-assembly. Pololu 2152
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
No product available!
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
No product available!
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
No product available!
Raspberry computer case: Pi 3 model B +, Pi 3 model B, Pi 2 model B and Pi 1 model B + in gray with metal
No product available!
Battery: Li-Ion; 3.7V; 1000mAh; Outputs: wires with 2-pin JST-PH connector; 50.8 mm x 33.5 x 5.9 mm. PRT-13813
No product available!
No product available!
This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/16-step).
No product available!
Wheels fit 2 mm diameter output shafts such as the ones on our sub-micro plastic planetary gearmotors. Pololu - 2356
No product available!
JEKEN CE-6200A ultrasonic cleaner, with digitally adjustable working time, power 70 W and a capacity of 1.4 l. It is well suited for repair and maintenance of electronic components, PCBs, optical elements, as well as for the dissolution of polymers
No product available!
Rick Waldron, Anna Gerber, David Resseguie, Emily Rose, Susan Hinton, Sara Gorecki, Bryan Hughes, Andrew Fisher, Julian David Duque, Pawel Szymczykowski, Donovan Buck, Jonathan Beri, Kassandra Perch, Raquel Vélez, Lyza Danger Gardner
No product available!
The grapple is used for precise operations when replacing SMD and BGA circuits. It allows you to lift small electronic components without using tweezers
No product available!
Spray CLEANSER PCC 15 with a capacity of 150ml, with a brush is a reliable solution for cleaning printed circuit boards and soldering residues. MICROCHIP
No product available!
Spray CLEANSER PCC 15 with a capacity of 400ml, with a brush is a reliable solution for cleaning printed circuit boards and soldering residues. MICROCHIP
No product available!
No product available!
Dispensing needle for precise application of glue, flux with an inner diameter of 0.62mm and an external diameter of 0.9mm.
No product available!
Dosing needle for precise application of glue, flux with an inner diameter of 0.25 mm and an external diameter of 0.51 mm
No product available!
A set of spacers and connectors together with a PCB to expand the Pololu 3pi robot. Black PCB in a version without cutouts for the display and connectors. Pololu 976