- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
FM receiver - Grove module
ID: 564218
Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115MHz). The module has been equipped with a 3,5mm jack socket, through which you can connect headphones. The module has a connector in accordance with the Grove standard. Seeed Studio 107020006
Description
Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115 MHz). The module has been based on the RDA5807M system. The module has been equipped with a 3.5 mm jack socket with the help of which you can connect headphones on which the received sound will be played. The module has a connector in accordance with the Grove standard.
The module can be used with the Base Shield V2 - shield extension with Grove connectors for Arduino
properties
- FM radio receiver
- Frequency: 50-115 MHz
- Support for RDS / RBDS
- 3.5 mm jack connector for connecting headphones
- Digital gain adjustment
- Grove connector
- Power supply: 3.3-5 V
- Dimensions: 21 x 40 x 10.5 mm
- Weight: 11 g
564218
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Module with ultraviolet (UV) sensor based on the GUVA-S12D system. It allows measurement of radiation with a wavelength in the range from 240 to 370 nm. The module has a connector in accordance with the Grove standard. Seeed Studio 101020043
zł51.94
24h
Available quantity: 1
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł33.01
24h
Available quantity: 2
Available
Recorder v3.0 is a module that allows you to record and play sounds. The module was based on the ISD9160FI system, it also has a FLASH memory with a capacity of 2 MB, which allows for recording up to 83 seconds long. The set contains a small loudspeaker on which recorded sounds can be played. Seeed studio 107020029
zł57.64
Delivery date unknown
No product available!
The set has many interesting modules / sensors with a Grove connector, among others module with microphone, module with sound sensor, module with temperature sensor, 2x16 LCD display with RGB backlight, module with buzzer, LED diodes, etc. Seeedstudio 110020109
zł332.85
24h
Available quantity: 1
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 17
Available
Other products in the same category (16)
No product available!
No product available!
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
Retired
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
Retired
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
Retired
No product available!
Prototyping kit dedicated to micro:bit. It offers pin leads, a contact plate, buttons, LEDs and a buzzer. SB Components 22717
Retired
No product available!
Module with WM8960 audio codec to support 1 W stereo speakers and two microphones via I2S interface. SB Components 24087
Retired
No product available!
UPS uninterruptible power supply module for Raspberry Pi, allowing the microcomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. SB Components UPS HAT
Retired
No product available!
ESC RC controller module with FlySky receiver designed for two brush motors with a supply voltage from 2.5 to 5 V and a current consumption of 2 A
Retired
No product available!
SimpleFOC brushless motor driver module dedicated to Arduino boards. SimpleFOC Shield v2.0.4
Retired
No product available!
630 kV brushless DC motor. Powered by 2S to 4S packages, dedicated to drones, airplanes and camera stabilizers
Retired
No product available!
HD digital microscope with HDMI output. The built-in camera has 48 MP, it is powered with 5 V via USB 2.0. Kailiwei S180
Retired
No product available!
UHD 4K digital microscope with HDMI output. It allows you to record, take pictures and view live images with the distance measurement function. EOC E-U4K-G
Retired
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°, no IR filter. ArduCAM B006604N
Retired
No product available!
Single-core, multi-strand wire in blue silicone insulation. Thickness 22AWG, length 4m
Retired
No product available!
Single-core, multi-strand wire in green silicone insulation. Thickness 22AWG, length 4m
Retired
No product available!
Module with FM receiver, with its help it is possible to receive radio waves broadcast in the FM band (frequency 50-115MHz). The module has been equipped with a 3,5mm jack socket, through which you can connect headphones. The module has a connector in accordance with the Grove standard. Seeed Studio 107020006