- Out-of-Stock
Terasic RFS Daughter Card (P0499)
ID: 564174
Expansion card dedicated for sets from the Terasic DE FPGA series. It contains mainly elements necessary for communication (Wi-Fi module and Bluetooth) and sensors (light, humidity, temperature, accelerometer, gyroscope and magnetometer). The built-in UART <> USB converter enables communication with a PC. Terasic P0499
Description
Terasic RFS (Radio Frequency and Sensor) Expansion Card has been equipped with communication modules and many sensors that are useful to use IoT (The Internet of Things). The card can be used with DE series FPGA plates from Terasic. RFS for connection to evaluation boards uses a 2x20 connector. In the expansion card, there is a Wi-Fi module and Bluetooth for communication, an additional built-in UART <> USB converter will facilitate communication with a PC. There are a number of sensors on the board - light, temperature, humidity, accelerometer, gyroscope and magnetometer.
properties
- The extension card includes:
- Wi-Fi module - ESP-WROOM-02
- Bluetooth module - HC-05
- IMU 9DOF- Accelerometer, gyroscope and magnetometer
- Light sensor
- Humidity and temperature sensor
- Converter UART <> USB
- Pinout of GPIO pins in the form of a 2x6 connector
- Dimensions: 56 x 60 mm
Included
- Terasic RFS Expansion Card
- CD
- 40-pin IDC tape
564174
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
No product available!
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. Kit contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources
zł1,029.52
24h
Available quantity: 4
Available
Other products in the same category (16)
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM321
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM322
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and two sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM511
Retired
No product available!
Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242
Retired
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
A module with 5 buttons and an RGB diode, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer through the GPIO expander controlled by the I2C interface. Pimoroni PIM301
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of herbs: basil, coriander and rosemary. Pimoroni PIM518
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of chilli. Pimoroni PIM519
Retired
No product available!
A module with a spectrum sensor that operates in the visible light range (450-650 nm). It allows you to measure and characterize a light source or check how the tested surface absorbs or reflects light at specific wavelengths. Pimoroni PIM412
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. It enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. Pimoroni PIM460
Retired
No product available!
Module with 6-axis IMU motion sensor that combines a 3-axis accelerometer and a 3-axis magnetometer in one system. It communicates via the I2C bus. Pimoroni PIM376
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
The system of a practical clock with an extremely simple design is equipped with a readable LED display, an alarm clock with a snooze function, and battery backup of the clock operation after a power failure
Retired
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Retired
No product available!
Expansion card dedicated for sets from the Terasic DE FPGA series. It contains mainly elements necessary for communication (Wi-Fi module and Bluetooth) and sensors (light, humidity, temperature, accelerometer, gyroscope and magnetometer). The built-in UART <> USB converter enables communication with a PC. Terasic P0499