- Out-of-Stock
Orange Pi PC Plus
ID: 562191
Orange Pi PC Plus H3 Quad-Core Development Board (1GB DDR3 SDRAM)
Description
Orange Pi PC Plus is an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Raspbian Image. It uses the AllWinner H3 SoC, and has 1GB DDR3 SDRAM.
Features
- CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K
- GPU: Mali400MP2 GPU @600MHz
Supports OpenGL ES 2.0 - Memory (SDRAM): 1GB DDR3 (shared with GPU)
- Onboard Storage: TF card (Max. 32GB) / MMC card slot
8GB EMMC Flash - Onboard Network: 10/100 Ethernet RJ45
- Video Input: A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to 1080p@30fps - Audio Input: MIC
- Video Outputs: Supports HDMI output with HDCP
Supports HDMI CEC
Supports HDMI 30 function
Integrated CVBS
Supports simultaneous output of HDMI and CVBS - Audio Output: 3.5 mm Jack and HDMI
- Power Source: DC input, USB OTG input don't supply power
- USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG
- Buttons: Power button
- Low-level peripherals: 40 Pins Header,compatible with Raspberry Pi B+
- GPIO(1x3) pin: UART, ground.
- LED: Power led & Status led
- Key: IR input,POWER
- Supported OS: Android Lubuntu, Debian, Raspbian Image
- Product size: 85mm × 55mm
- Weight: 70g
562191
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adapter for power supply with 5.5 x 2.1 mm input and 4.0 x 1.7 mm output
zł4.70
24h
Available quantity: 10
Available
Acrylic computer case for Orange Pi PC / PC Plus / PC 2, transparent. Orange Pi
Delivery date unknown
No product available!
Compact power supply with a voltage of 12V and a power of 24W, suitable for devices with low power consumption. It has a 5.5 x 2.1 mm connector, often found in industrial cameras, CCTV systems, routers and LED strips. Akyga AK-TB-17
zł34.37
24h
Available quantity: 4
Available
Other products in the same category (16)
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Rainbow Silk
Retired
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Yellow
Retired
No product available!
ROSA3D filament made of high-quality biopolymer with wood particles. 1 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioWOOD
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glitter Bronze
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Pink Satin
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Gray
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Black
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A White
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Pink
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Green
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Blue
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Transparent
Retired
No product available!
ROSA3D filament made of high-quality polycarbonate with Teflon. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PC+PTFE White
Retired
No product available!
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A Red
Retired
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA White
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 3 kg of 1.75 mm filament is wound on the spool. ROSA3D PLA Plus ProSpeed White
Retired
No product available!
Orange Pi PC Plus H3 Quad-Core Development Board (1GB DDR3 SDRAM)