.png)
- Out-of-Stock
AVT2978 A
ID: 190631
LAMP HEADPHONE AMPLIFIER - PRINTED PLATE
LAMP HEADPHONE AMPLIFIER - PRINTED PLATE
Producer: AVT
Tube systems almost lost their time forever. Only a few remember the years of their magnificence, mainly for the schemes in magazines or perishable Rubies. Currently, despite the rule of semiconductors, among the young electronics, there is a growing interest in glass 'bubbles'. Maybe it is due to the mysterious light of a hot cathode, maybe - a retreat from bytes, gigahertz etc. For these people, a simple tube amplifier was designed. Few elements, ease of performance and power supply - high voltage obtained in the converter - all this speaks for the construction of this nostalgic device.
The device is especially recommended for novices and lamp professionals
Selected parameters:
- two PCC88 lamps were used in the system
- signal part connected in the air, voltage converter on the board
- smooth volume control
- system with output transformers
- power supply - 9-12Vdc
- printed circuit board and documentation included
- Detailed description in
190631
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
Educational set for building robots based on Totem construction elements. Designed for beginners, it allows you to create 7 robot structures based on the included assembly instructions. Totem TKR-RK1
Retired
No product available!
A computer adapter (USB, Ethernet, WiFi) that works as a 4-channel oscilloscope, a 16-channel logic analyzer and a programmable signal generator. Includes BNC probes. Digilent 471-040
Retired
No product available!
A computer adapter (USB, Ethernet, WiFi) that works as a 2-channel oscilloscope, a 16-channel logic analyzer and a programmable signal generator. Includes BNC oscilloscope probes. Digilent 471-041
Retired
No product available!
Transistor tester dedicated to work with Analog Discovery 2 and Analog Discovery (Legacy) devices. It allows you to draw the characteristics of such elements as diodes, NPN and PNP transistors as well as P and N FET transistors. Digilent 410-413
Retired
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM331
Retired
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM332
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin output for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM320
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM321
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM322
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and two sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM511
Retired
No product available!
Extension module for Raspberry Pi. The board has 7 RGB LEDs, four 14-segment displays, three single-color LEDs, as well as three touch buttons, a BMP280 sensor and a buzzer. Pimoroni PIM242
Retired
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
A module with 5 buttons and an RGB diode, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer through the GPIO expander controlled by the I2C interface. Pimoroni PIM301
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of herbs: basil, coriander and rosemary. Pimoroni PIM518
Retired
No product available!
Kit for controlling soil moisture of cultivated plants. It contains the HAT Mini module, soil moisture sensors and pots and seeds of chilli. Pimoroni PIM519
Retired
No product available!
LAMP HEADPHONE AMPLIFIER - PRINTED PLATE