LED strip with addressable RGB WS2813 diodes placed on a flexible black PCB strip. It is powered by 5 V, has 60 LEDs/m and requires up to 18 W/m to work at full capacity. The tape offers an IP30 protection level which means it is not waterproof. It is dedicated mainly to installations inside buildings, not exposed to contact with water.
The type of WS2813 used is addressed LEDs with a built-in driver, which means that each LED can be controlled individually. They have a convenient control interface that requires only one data line, thanks to which we are able to control a large number of elements without taking up many microcontroller outputs.

WS2813 diodes support the system of resuming operation after a line interruption - in the event of failure of one diode, the other diodes will continue to glow. This system works until there are two faulty diodes next to each other.
The strip has been designed so that it can be cut and combined with other installations. Each LED can be cut off and connected to a different lighting element, maintaining its structure and full functionality.
The LED strip is equipped with a tape that allows for easy installation on flat surfaces. It will be used in lighting installations, as a decorative element in the living room, kitchen or workshop.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Switching power supply with a power of 15 W, an output voltage of 5 V and a current of 3 A. It has built-in protection against overload, overheating and short circuit. Mean Well RS-15-5
Switching power supply with a power of 50 W, an output voltage of 5 V and a current of 10 A. It has built-in protection against overload and short circuit. Mean Well RS-50-5
Switching power supply with a power of 35 W, output voltage of 5 V and current of 7 A. It has built-in overload and short-circuit protection and a low profile housing. Mean Well LRS-35-5
Switch-mode power supply with a power of 110 W, an output voltage of 5 V and a current of 22 A. It has built-in protection against overload, overheating and short circuit and a low profile design. Mean Well LRS-150F-5
LED RGB WS2812B, Black Strip, 1m, 30LEDs / m, no waterproof
No product available!
LED RGB WS2812B, Black Strip, 5m, 60LEDs / m, waterproof IP67
No product available!
Waterproof NeoPixel tape with RGB LED diodes with a length of 2 m, 60 LEDs per meter, diodes are mounted on an elastic PCB in black. Adafruit 1376
RGB LED WS2812B LEDs on a black strip, 144 LEDs per 1m. The diodes are not protected against water. The strips can be cut or joined into ranks
No product available!
No product available!
5 m long LED strip with 100 purple LEDs. It is powered with the voltage of 12 V through the DC connector 5.5 x 2.1 mm. DFRobot FIT0385-P
Tape with RGB LEDs WS2812B 1m long, 144 LEDs per meter, the diodes are mounted on a flexible white PCB. The diodes are not protected against water.
RGB LED strip consisting of 120 colorful WS2812 LEDs. The diodes are controlled by one signal line. The strip can be arbitrarily bent or cut. Equipped with adhesive tape for easy assembly. DFRobot FIT0612
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
LED strip with addressable RGB WS2813B diodes on a black PCB. It is powered by 5 V DC, has a length of 1 m and 144 LEDs/m. Protection degree IP65
LED strip with addressable RGB WS2813B diodes on a black PCB. It is powered by 5 V DC, has a length of 5 m and 60 LEDs/m. Protection degree IP67
Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005
Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)
LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 1 m and 60 LEDs/m. Protection level IP30