Mini UPS backup power module - Waveshare 24760
ID: 1185439
5906623423828
zł78.03
Tax included
zł63.44 tax excl.
Uninterruptible power supply (UPS) module allowing continued operation and safe shutdown after a power failure. It provides an output voltage of 5 V and allows the reading of battery operating parameters via the I2C bus. Waveshare UPS Module Mini
Description
UPS uninterruptible power supply module with integrated Li-Ion charger . When connected to three type 10440 batteries, it maintains a stable output voltage of 5 V even after a power loss, allowing the unit to continue operating and shut down safely. The state of charge of the battery is indicated by the built-in LEDs, and full monitoring of the battery status is possible via the I2C interface. The UPS can deliver up to 2.5 A of current. It is equipped with overcharge/discharge protection circuits, has overcurrent protection, short circuit protection and reverse polarity protection. It will be used in a variety of projects requiring a stable power supply regardless of external conditions. Full documentation is available on the product wiki page.
Features
- I2C communication
- Real-time monitoring of battery voltage, current, power and capacity
- Overcharge/discharge protection circuits, overcurrent protection, short circuit protection and reverse polarity protection
- Battery warning indicators
- Charge: 5 V 3 A
- Power supply: 3 x 10440 battery
- Voltage stabiliser 5 V/2.5 A
- Output voltage: 5 V
- Dimensions: 61 x 38 mm
1185439
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Two-channel processor charger designed for Li-Ion cylindrical batteries in various sizes (including 18650). It can charge batteries both with PCM protection and without protection. The nominal charging current in the main phase is 0.5A per channel. XTAR MC2
zł24.78
24h
Available quantity: 8
Available
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare UPS HAT (EU)
zł85.07
Delivery date unknown
No product available!
Other products in the same category (16)
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 12 V and a maximum input of up to 2 A. Pololu 4945
zł26.91
24h
Available quantity: 7
Available
Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 600 mA) connected to the USB socket. There is a diode on the board indicating the power connection. modPS
zł7.48
24h
Available quantity: 6
Available
DC-DC Step-up converter module based on the U3V70F12 system. Input voltage 2.9-12V, output voltage 12V, maximum current 10A. Two mounting holes. Pololu 2895
zł90.85
24h
Available quantity: 2
Available
The Step-UpU1V11F5 Buck Voltage Regulator module with output voltage 5V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2562
zł34.30
4 weeks
No product available!
Step-Up/Step-Down converter module based on the S13V20F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2,5 A. Pololu 4085
zł68.09
4 weeks
No product available!
Step-Down converter D36V50F5 with an output voltage of 5 V, an input voltage from 5.5 to 50 V and a maximum output current of 8 A. Pololu 4091
zł151.14
24h
Available quantity: 1
Available
The Step-Up Buck Voltage Regulator module with output voltage of 3.3V and input voltage range of 1-3V and a maximum output current of 200 mA. STMicroelectronics EVAL4971
zł69.50
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36V and efficiently reduces it to 5V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5A and features reverse voltage protection. Pololu 2858
zł74.91
24h
Available quantity: 3
Available
Step-Down converter D36V50F6 with an output voltage of 6 V, an input voltage from 6.5 to 50 V and a maximum output current of 8 A. Pololu 4092
zł123.28
24h
Available quantity: 2
Available
The Step-Down D24V3F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 300 mA. Pololu 2098
zł34.17
24h
Available quantity: 4
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output on a 5.08 mm ARK screw connector. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł29.50
4 weeks
No product available!
A small DC - DC boost module that converts a 0.9..5V power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control chip. FIT0471
zł19.75
24h
Available quantity: 2
Available
Step-Down converter D36V28F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 4.5 A. Pololu 3781
zł83.26
24h
Available quantity: 1
Available
Step-Up converter with an output voltage of 5 V, an input voltage of 0.9 to 5 V and a maximum current of 0.48 A
zł4.08
24h
Available quantity: 16
Available
Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
zł28.99
24h
Available quantity: 2
Available
An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.8 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4853
zł109.36
24h
Available quantity: 5
Available
Uninterruptible power supply (UPS) module allowing continued operation and safe shutdown after a power failure. It provides an output voltage of 5 V and allows the reading of battery operating parameters via the I2C bus. Waveshare UPS Module Mini