ProDriver - module with TC78H670FTG stepper motor driver
ID: 581527
5906623420612
zł102.25
Tax included
zł83.13 tax excl.
Module with bipolar stepper motor driver TC78H670FTG. It allows you to control the motor with an accuracy of 1/128 of a step with a voltage from 3.6 to 16 V and a current of up to 2 A. SparkFun ROB-16836
Description
Module with bipolar stepper motor driver TC78H670FTG. The board is equipped with convenient snap-in terminals that allow easy connection of the motor without the need for soldering. The module allows you to control the motor with an accuracy of 1/128 step with a voltage from 3.6 to 16 V and a current of up to 2 A. The system can be controlled by standard step commands or via a serial interface. The board has overvoltage protection and error detection. The module has a guide and the Arduino library with numerous examples.
Features
- Toshiba TC78H670FTG bipolar stepper motor driver
- Plug and play clip-on terminals (no soldering)
- Allows you to work in full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 steps
- Supply operating voltage: 3.6 V to 16 V
- Output current: 2 A.
- Additional overvoltage protection
- Fault detection functions (thermal shutdown (TSD), overcurrent (ISD), motor opening (OPD) and undervoltage lockout (UVLO))
- Space for a heat sink
581527
Data sheet
- Output current
- 2A
- Number of channels
- 1
- Supply voltage min
- 3,6 V
- Supply voltages max
- 16 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 14124
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.68
24h
Available quantity: 694
Available
This NEMA 17 pancake bipolar stepping motor from Sanyo features an integrated encoder. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 5.4 V, allowing for a holding torque of 1.9 kg-cm.
zł1,225.79
Delivery date unknown
No product available!
Other products in the same category (16)
DRV8711 stepper motor driver module powered by 8-50V voltage and 4A operating current. The controller allows you to control the movement of the engine with up to 9 different resolutions. Configuration via SPI interface. Pololu 3730
zł139.29
24h
Available quantity: 4
Available
TB67S128FTG stepper motor driver module powered by 6.5-44V voltage and 2.1A operating current. The controller allows you to control the movement of the engine with up to 8 different resolutions (up to 1/128 step). Pololu 2998
zł80.45
24h
Available quantity: 2
Available
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy. Pololu 3141
zł253.86
24h
Available quantity: 1
Available
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy. Pololu 3140
zł249.95
4 weeks
No product available!
Two-channel driver of direct current (DC) motors with an operating voltage from 4 to 16 V and a maximum continuous current of 3 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD3A
zł35.01
4 weeks
No product available!
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10
zł119.00
4 weeks
No product available!
Module with bipolar stepper motor driver TC78H670FTG. It allows you to control the motor with an accuracy of 1/128 of a step with a voltage from 3.6 to 16 V and a current of up to 2 A. SparkFun ROB-16836
zł102.25
3 weeks
No product available!
Module with the TMC2209 bipolar stepper motor driver. It enables control with a supply voltage ranging from 4.75 to 29 V and a current of up to 2.8 A
zł19.73
4 weeks
No product available!
Compact expansion module compatible with DRV8825 and A4988 stepper motor drivers. It allows you to connect the module with the controller and convenient connection of other system components
zł5.50
24h
Available quantity: 60
Available
Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 4.2 A. It allows you to configure the microstep in the range from 2 to 128. DM542
zł77.12
24h
Available quantity: 3
Available
Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 5.6 A. It allows you to configure the microstep in the range from 2 to 128. DM556
zł76.85
24h
Available quantity: 12
Available
Stepper motor driver that can operate with a voltage in the range from 24 to 110 VDC or from 18 to 80 VAC and a maximum current of 7.2 A. It allows for microstep configuration in the range from 2 to 256. DM860H
zł196.34
24h
Available quantity: 2
Available
Module with TB6612FNG DC motors dual driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020103
zł59.56
24h
Available quantity: 1
Available
Two-channel DC motor driver powered with the voltage from 2.5 to 12 V with a maximum continuous current of 0.8 A per channel. It can control a bipolar stepper motor
zł4.08
4 weeks
No product available!
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
zł116.47
24h
Available quantity: 1
Available
Module with TMC2208 stepper motor driver. It enables control with a supply voltage ranging from 5.5 to 34 V and a current of up to 1,2 A
zł20.43
24h
Available quantity: 11
Available
Module with bipolar stepper motor driver TC78H670FTG. It allows you to control the motor with an accuracy of 1/128 of a step with a voltage from 3.6 to 16 V and a current of up to 2 A. SparkFun ROB-16836