Fermion: I2C H3LIS200DL Triple Axis Accelerometer - module with a 3-axis H3LIS200DL accelerometer
ID: 586847
5906623407187
zł77.15
Tax included
zł62.72 tax excl.
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. It communicates via the I2C interface. DFRobot SEN0408
Description
Module with a 3-axis accelerometer with very low power consumption. It has a user selectable wide scale of ±100/±200g and is able to measure accelerations with a data rate of 0.5 Hz to 1 kHz. The sensor is equipped with dedicated algorithms, thanks to which it can detect movement, including free fall, and thanks to the wide measuring range, it is perfect for measuring acceleration, e.g. in crash tests. The module communicates via the I2C interface and is supplied with the voltage 3.3 V. Full documentation is available on the product Wiki page.
Features
- Measuring scale: ±100g/±200g
- 8 bit data output
- I2C interface (address 0x19, 0x18), SPI
- Configurable I2C address
- Data transfer rate: 0.5 Hz to 1000 Hz
- Shock resistance 10000g
- Working voltage: 3.3V
- Current consumption: 10 uA
- Dimensions: 15 x 20 mm
Kit contains
- Fermion: I2C H3LIS200DL Triple Axis Accelerometer
- 2 x 2.54-4P Black Single Row Pin Header
586847
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 227
Available
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.66
Delivery date unknown
No product available!
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. There is a Gravity connector on the board. DFRobot SEN0412
zł72.50
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł28.83
24h
Available quantity: 2
Available
Module with 3-axis digital accelerator ADXL345, SPI and I2C communication.
zł13.70
24h
Available quantity: 18
Available
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
zł19.90
24h
Available quantity: 462
Available
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
zł67.45
4 weeks
No product available!
Module with the 3-axis ADXL313 accelerometer with measuring ranges of ± 0.5 g, ± 1 g, ± 2 g or ± 4 g. The system is characterized by high 13-bit resolution and low power consumption. SparkFun SEN-17241
zł84.69
24h
Available quantity: 1
Available
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
zł14.30
24h
Available quantity: 30
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 2
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł43.53
24h
Available quantity: 3
Available
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
zł38.19
24h
Available quantity: 2
Available
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 452
Available
Module with a 3-axis H3LIS331 accelerometer with a wide measurement range up to ± 400g. It communicates via the I2C or SPI interface. SparkFun SEN-14480
zł90.64
24h
Available quantity: 2
Available
Module with a 3-axis ADXL345 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0032
zł28.55
24h
Available quantity: 3
Available
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
zł20.22
24h
Available quantity: 2
Available
Module with a 3-axis motion sensor MSA301 (accelerometer), which allows to measure acceleration in the range of ±2/±4/±8/±16 g. Communicates via the I2C bus. Pimoroni PIM456
zł33.53
24h
Available quantity: 2
Available
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871
zł73.85
24h
Available quantity: 1
Available
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
zł175.73
3 weeks
No product available!
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. It communicates via the I2C interface. DFRobot SEN0408