LCD-AG-TP-TFT5i6 PBF

The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279

Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT

The magnetic holder is an ideal solution for mounting small USB monitors or phones. It provides a stable grip and is easy to install. Waveshare Magnetic Holder

Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853

TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453

I2C converter for 2x16 / 4x20 characters, RoHS alphanumeric displays

An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172

Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036

An acrylic diffuser for the Pico 2W Unicorn Galactic board, which effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The set is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM713

Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048

Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211

An acrylic diffuser for Pico 2W Unicorn tiles that effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The kit is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM714

This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Adafruit 3305

Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm