ESP-07 - WiFi module with ESP8266 and SMainsign Rainsun antenna
ID: 557800
zł11.89
Tax included
zł9.67 tax excl.
WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
ESP-07 is a WiFi module working in WiFi 802.11 b / g / n standards based on the ESP8266 system. The connectors with a 2 mm pitch (with the possibility of soldering goldpins) were derived i.a. 9 GPIO lines and 1 ADV line. The module is equipped with a built-in ceramic antenna and U.FL connector to connect an external antenna.
Pins arrangement
- TXD / RXD - UART interface lines
- GND - mass
- VCC - 3.3 V power supply
- CH_PD - Power down line, after attaching GND, the module goes into sleep mode.
- ADC - ADC line
- REST - Reset
- GPIOx - GPIO module lines
Attention!
Entering the CH_PD 3.3 V line and GND line to the GPIO15 line starts the module software update mode.
Entering the CH_PD 3.3 V line and GND line to the GPIO15 line starts the module software update mode.
Features
- ESP8266MOD module
- Supply voltage: 3.3V
- Operating frequency 2.4GHz
- Transmitted power level: +25dBm
- Built-in Rainsun chip antenna and U.FL connector for an external antenna.
- WiFi standard - 802.11 b/g/n
- Connections: 9 GPIO ports, 1 ADC port, UART
- UART transmission
- Dimensions: 22x16[mm]
557800
You might also like
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
zł10.96
Delivery date unknown
No product available!
WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E
zł10.25
24h
Available quantity: 134
Available
Other products in the same category (3)
The base board for the Wi-Fi NodeMCU module (ESP-12E), thanks to the built-in L293DD system, allows for attaching e.g. motors, electromagnets or other executive devices. The I/O lines of the NodeMCU module were derived to the pin connectors, and the power supply can be connected with the use of screw connectors. ESP12E Motor Shield
zł7.87
24h
Available quantity: 36
Available
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
zł10.96
6 weeks
No product available!
Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05
zł17.90
24h
Available quantity: 25
Available
WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07