zł565.36 tax excl.
GNSS antenna SPK6618H enabling tri-band reception (L1/L2/L5) for GPS, GLONASS, Galileo and BeiDou constellations. It uses a 5/8 inch 11TPI thread found in high-end antennas and surveying equipment. SparkFun GPS-21801
GNSS antenna SPK6618H enabling tri-band reception (L1/L2/L5) for GPS, GLONASS, Galileo and BeiDou constellations. It has a built-in ground plane with frequency filtering and amplification. It offers high gain and a wide beam pattern, which ensures a good reception effect even for signals received at low altitude. It uses a multi-power design scheme to ensure that the phase center and geometric center coincide and minimize the antenna influence on the measurements. The design of the antenna element helps reduce multipath, facilitating reception in complex operating environments. The antenna can be used with any GPS/GNSS receiver that can use L1/L2 dual-band or L1/L2/L5 tri-band reception. It has a female TNC connector found on almost all surveying antennas. When using GNSS receivers, it is recommended to use a TNC male to SMA adapter or cable. In addition, it uses a standard 5/8"-11TPI mount. It is not compatible with a camera tripod.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Kit with GNSS RTK Express receiver, L1/L2 antenna and accessories. It allows you to get centimeter-level global positioning measurements using GNSS RTK. SparkFun GPS-18380
No product available!
Kit with GNSS RTK Express Plus receiver, L1/L2 antenna and accessories. It allows you to get centimeter-level global positioning measurements using GNSS RTK. SparkFun GPS-18589
No product available!
Kit with GNSS RTK Surveyor receiver, L1/L2 antenna and accessories. It allows you to get centimeter-level global positioning measurements using GNSS RTK. SparkFun GPS-17370
No product available!
A GNSS module that combines the precise u-blox ZED-F9P receiver with the NEO-D9S L-band GNSS correction data receiver. Provides high-accuracy positioning without the need for separate RTK or NTRIP corrections. SparkFun GPS-22560
No product available!
Taoglas Wi-Fi antenna with U.FL connector It provides the perfect connection to Wi-Fi in any device. The frequency band of the antenna is 2.4 GHz
LPWA antenna dedicated to communication in LoRa networks in the 433 MHz frequency band. Equipped with an SMA connector. Waveshare SMA 433 Antenna
Antenna with an SMA male connector working in the 868 MHz frequency band. It has a gain of 3 dBi. Comes with an SMA - u.FL adapter
No product available!
The module with the HCM472 digital attenuator with the operating frequency range from 1 MHz to 3.8 GHz. Has an adjustable damping factor ranging from 0 to 31.5 dB with 6-bit resolution (0.5 dB step)
The WS-630 antenna amplifier improves radio signal reception in the car, supporting FM, VHF, and DAB bands. Thanks to its compact design and simple 12 V power connection, it allows for quick installation and enhancement of sound quality in most vehicles. Suitable for upgrading radio reception in cars operating in difficult signal conditions.
WiFi antenna with SMA male plug working in the 2.4 GHz frequency band. It has a gain of 3 dBi
WiFi antenna compatible with Raspberry Pi Compute Module 4. Supports 2.4G and 5G frequency bands. Waveshare ORD-CM4-ANTENNA
Antena o wzmocnieniu 2dBi, przekazana do komunikacji na częstotliwości 868 MHz. złącze w złącze SMA. SparkFun WRL-20855
No product available!
WiFi antenna with SMA male plug working in the 2.4 GHz frequency band. It has a gain of 5 dBi and a foldable tip
No product available!
LPT100 WiFi Module Mother Board
The adapter allows you to connect the antenna with a standard 75 Ω connector to the device with the MCX connector. The cable length is 13cm, it is often used in USB DVB-T tuners
Waveshare WIFI501 is a mother board designed to be used with WiFi modules like WIFI232 series, WIFI-LPT100. It provides an easy way to test/evaluate these WiFi to UART modules
External 2.4G/5G antenna with RP-SMA male connector and 130 mm cable improves stability and connection quality in wireless devices. Suitable for Wi-Fi systems, IoT, and industrial applications requiring reliable data transmission. Seeed Studio 114993587
No product available!
Antenna with an SMA male connector working in the 868 MHz frequency band. It has a gain of 5 dBi and the tip at right angles
No product available!
ANT0017 enables connecting 2.4 GHz WiFi devices to an external 5 dBi gain antenna, improving signal range and stability. The RP-SMA connector and U.FL/IPX cable ensure wide compatibility with communication modules and networking equipment. ANT0017
No product available!
GNSS antenna SPK6618H enabling tri-band reception (L1/L2/L5) for GPS, GLONASS, Galileo and BeiDou constellations. It uses a 5/8 inch 11TPI thread found in high-end antennas and surveying equipment. SparkFun GPS-21801