zł65.24 tax excl.
Active GNSS L1/L2/L5 Quadrifilar Helix antenna with SMA male connector, supporting GPS, BDS, GLONASS, and Galileo. High gain, low noise figure, RHCP polarization, and IP67-rated enclosure for outdoor applications. Q39 version with wide-body design for stable signal reception. Waveshare Q39 GNSS Helical Antenna
The Q39 GNSS Helical Antenna is an active multi-band GNSS antenna based on a Quadrifilar Helix structure, designed for high-precision positioning in multi-constellation systems. The antenna supports signal reception in the L1, L2, and L5 bands for GPS, BDS, GLONASS, and Galileo, increasing the number of tracked satellites and improving positioning stability and accuracy.
The Quadrifilar Helix structure provides a 360° wide-angle radiation pattern and right-hand circular polarization (RHCP), enhancing reception of low-elevation satellite signals. Compared to traditional patch antennas, this design improves the utilization of low-horizon signals, resulting in better positioning performance in demanding environments.
The Q39 version features a wider body design that provides stable and reliable signal characteristics. An integrated amplifier with 28 dB gain and a low noise figure of 1.5 dB supports consistent GNSS signal reception. Power is supplied via DC bias through the RF cable. The antenna is equipped with an SMA male connector and operates within a voltage range of 3.0 - 16 V DC.
The IP67-rated enclosure enables long-term outdoor operation in RTK systems, precision mapping, smart agriculture, smart home installations, and other applications requiring stable multi-band GNSS reception.
Data sheet
Manufacturer
Responsible person
Antenna base with SMA female connector and 3 m RG174 coaxial cable, designed for magnetic mounting of GNSS, LTE, and other SMA-equipped antennas. Frequency range 0 - 6 GHz, impedance 50 Ω. Waveshare SMA Magnetic Mount Antenna Base
No product available!
A 2.4GHz antenna dedicated to the XIAO ESP32C3. With a robust and effective design, the antenna enhances the wireless capabilities of the board. Seeed Studio 103990623
External antenna with 5.8dBi gain dedicated to LoRa communication. It is designed to operate in the frequency band from 863 to 870MHz and is 90cm long. It was made of fiberglass and aluminum. SparkFun WRL-19274
No product available!
Antena o wzmocnieniu 2dBi, przekazana do komunikacji na częstotliwości 868 MHz. złącze w złącze SMA. SparkFun WRL-20855
LPWA antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an SMA connector. Waveshare SMA 868 Antenna
No product available!
LPWA antenna dedicated to communication in LoRa networks in the 433 MHz frequency band. Equipped with an SMA connector. Waveshare SMA 433 Antenna
External waterproof LPWA antenna dedicated to communication in LoRa networks in the 433 MHz frequency band. It is mounted using the magnet built into the cradle. Waveshare 433/470M Magnet Mount Antenna
External waterproof LPWA antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. It is mounted using the built-in magnet in the cradle. Waveshare 868/915M Magnet Mount Antenna
Dual-band antenna operating in the 2.4 GHz or 5.8 GHz band. Works great with WiFi, Bluetooth or ZigBee. Uses the popular U.FL connector. SparkFun WRL-18087
GNSS antenna SPK6618H enabling tri-band reception (L1/L2/L5) for GPS, GLONASS, Galileo and BeiDou constellations. It uses a 5/8 inch 11TPI thread found in high-end antennas and surveying equipment. SparkFun GPS-21801
No product available!
Antenna dedicated to communication in the 433 MHz frequency band. Equipped with an SMA connector. SparkFun WRL-20856
No product available!
Omnidirectional antenna designed for transmitting and receiving at 401 MHz. It is compatible with the ARGOS ARTIC R2 satellite communication switchboard. SparkFun WRL-17523
Efficient, broadband, flexible LTE antenna with small dimensions. It is easy to install and durable (made of flexible polymer). It operates with an efficiency exceeding 45% on the LTE bands from 698 to 3000 MHz, but can operate in the frequency band from 600 MHz to even 6000 MHz. SparkFun WRL-22527
No product available!
High-performance magnetic antenna, optimized for communication with the Iridium satellite system, made of durable materials resistant to UV, moisture and high temperatures. It has a waterproof housing compliant with the IP69 standard, as well as a wide operating temperature range from -40 ° C to + 85 ° C. Thanks to the magnetic holder, the antenna is easy to install and remove, and the standard SMA connector and 300 cm LL100 coaxial cable provide convenience of use. SparkFun WRL-25068
No product available!
7 dBi 3G/4G/LTE antenna with wide frequency range designed to improve cellular connection quality. The magnetic base and long cable make it easy to install in the optimal location, making it suitable for routers, modems, telemetry systems, and IoT applications
The dual-band 2.4 GHz and 5 GHz antenna with a 5 dBi gain and RP-SMA male connector provides stable connections for routers, Mini PCI cards, and other devices. With its omni-directional design and flexible construction, it offers wide signal coverage, while the included SMA-to-u.FL pigtail cable enhances its versatility in IoT applications.
No product available!
The internal WiFi antenna with a 3 dBi gain, supporting 2.4 GHz and 5.8 GHz frequency bands, provides stable wireless connections for devices such as Mini PCI cards, cameras, USB adapters, and network routers. Available with RP-SMA or SMA connectors, it ensures easy integration with a variety of network equipment. Its flexible rubber construction allows for optimal positioning to achieve the best signal.
Active GNSS L1/L2/L5 Quadrifilar Helix antenna with SMA male connector, supporting GPS, BDS, GLONASS, and Galileo. High gain, low noise figure, RHCP polarization, and IP67-rated enclosure for outdoor applications. Q39 version with wide-body design for stable signal reception. Waveshare Q39 GNSS Helical Antenna