Best sellers

WEP 878D soldering station is a station with hot air soldering iron (hotair) and 50W soldering iron. It is used in electronic services for safe soldering QFP, BGA, SMD, PLCC and other temperature sensitive components. WEP 878D

WEP 938 soldering station is a powerful soldering iron that quickly reaches the set temperature and quickly compensates for heat loss during operation. Thanks to this, you can solder at a lower temperature compared to cheaper soldering irons with slow temperature compensation. The station has the functions: temperature memory, sleep function, automatic shutdown. WEP 938

The WEP 898DB soldering station is a small and functional tool designed for professional work. It has a hot air and tip soldering iron, has the ability to adjust the temperature and air blast power and two LED displays showing the temperature for both soldering irons. WEP 898DB

The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station\'s operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+

WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+

STM32L552VET6, Ultra-low-power with FPU Arm Cortex-M33 with Trust Zone, MCU 110 MHz with 512 kbytes of Flash memory, LQFP100

Large heat sink in the form of a case covering the entire board. Designed for Raspberry Pi 4 minicomputers. Gold color.

Expansion board for STM32 Nucleo designed for applications using MEMS analog microphones. The board is compatible with STM32 Nucleo and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-AMICAM1

ESD anti-static mat, green/gray, size 600x10000mm and thickness 2mm. It protects the table top and protects sensitive elements from being damaged by electrostatic charges.

Xilinx adapter that connects to Xilinx\'s 14-pin, 2mm JTAG connector, providing debugging of MCU cores such as the Arm Cortex-A9 on Xilinx Zynq FPGAs. With its compact design and high signal quality, it is a reliable tool for engineers working with FPGA platforms. Segger Xilinx Adapter (06/08/19)

Professional reference board with ARM Cortex-M4F microcontroller, designed for code tracing and real-time application analysis. Equipped with an external 19-pin debug port and test points for trace signals, it enables easy integration with J-Link and J-Trace programmers, supporting Embedded Trace Macrocell (ETM) technology. Segger Cortex-M Trace Reference Board (6.68.18)

5-meter LED strip for lighting plants supports the photosynthesis process thanks to the full spectrum of light and IR and UV diodes that support different stages of growth. With IP33 protection class, 12V DC power supply and self-adhesive backing, the strip is easy to install and suitable for less humid places.

Designed for lighting plants in home and greenhouse conditions, the 5-meter LED strip uses the full spectrum of light, supporting photosynthesis and plant development at different growth stages. With 60 LEDs per meter, including 4 IR and 1 UV, and an IP65 protection class, the strip is water and dust resistant, making it suitable for use in humid environments, and a 12V DC power supply ensures its efficient operation.

The P2150 oscilloscope probe with a 150 MHz bandwidth and BNC connector ensures high signal integrity and wide bandwidth, featuring switchable attenuation of 1X/10X and an input resistance of 1 MΩ/10 MΩ ±2%. The set includes accessories such as a compensation tool, identification rings, and a hook clip for easier use.

Compact programmer/debugger from Digilent, designed for use with Xilinx FPGA and SoC devices, including Zynq. With a USB 2.0 interface (up to 30 Mbit/s), power supply from a micro-B port, and full compatibility with Vivado, ISE, iMPACT, and EDK software, it provides convenient and reliable project support. Its design allows easy connection to boards with a 2x7 (2 mm) JTAG socket and sharing the bus with other devices. Digilent 410-299

Professional oscilloscope probe, ideal for precise signal measurements. Hantek PP-150B

Manual soldering extractor in aluminum housing with high suction power. Weller PS200A

The LY68L6400 64Mb SRAM memory is a modern device designed for high-performance embedded systems, IoT and portable devices, offering fast access to data at low power consumption thanks to SPI and QPI interfaces. High read and write speeds and a wide operating temperature range make it an ideal solution for various applications.

DIP Switch with two sections, made in THT technology, with angular setting and a raster of 2.54 mm. It has a height of 9.90 mm. DIP-SWITCH 02

The SparkFun Qwiic Pro Micro board is an improved version of the original Pro Micro that enriches the range of manufacturer\'s microcontrollers compatible with Arduino. SparkFun DEV-15795