Best sellers

CS-Mount lens. 25 mm focal length, 14° FoV, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN041

EMMC Flash memory module for Hardkernel Odroid N2 computers. 32GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 32GB eMMC Module N2 Android

Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min

Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.

Desktop Kit with Raspberry Pi 4 minicomputer model B 8 GB RAM. In addition to the Raspberry Pi minicomputer, the set includes: an official keyboard and mouse, 5.1 V (3 A power supply), an official case (white-raspberry), two official microHDMI cables, a 16 GB memory card with NOOBS software and a guide.

E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591

The multimeter measures inductance, resistance and capacity. Equipped with in diode tester, circuit continuity test and transistor test. Uni-T UT603

Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845

Easy PET-G filament in Onyx with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Onyx

Module with a 3-axis magnetometer based on the MLX90393 system. It has a measuring range from ± 5mT to ± 50mT and a resolution of 0.161 µT. The I2C or SPI interface is used for communication. Adafruit 4022

Easy PET-G filament in light green transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Light Green Transparent

Easy PET-G filament in graphite with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Graphite

Digital oscilloscope equipped with a 7" TFT LCD display. It has two measurement channels with a 200 MHz bandwidth, a sampling rate of 1 GSa/s and a 14 Mpkt memory buffer. Siglent SDS1202X-E

Easy PET-G filament in black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Black

Module with the SX1276 868 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0125

A set consisting of 500 screws with diameters M3, M4 and M5 and lengths from 6 to 30 mm

Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097

Motor with 25 mm diameter and 69 mm length, 99:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 76 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4867