• New
Main view
search
  • Main view
  • Top and bottom view
ID: 1209225
zł106.67
Tax included

zł86.72 tax excl.

Makerbase MKS 2804 three-phase brushless gimbal motor featuring an AS5600 magnetic encoder for rotor position measurement. Operates at a rated voltage of 12 V DC, with a speed constant of 220 KV, phase resistance of 5.2 Ohm and 7 magnetic pole pairs. The encoder provides 12-bit position measurement via the I2C interface and an analog output. With a motor diameter of 34.5 mm, it is designed for SimpleFOC projects, robotics and positioning mechanisms. The kit includes the motor with encoder and three connection cables. Makerbase MKS 2804

24h
Available
Available quantity: 1

Description

The MKS 2804 brushless motor from Makerbase is designed for drive systems requiring speed regulation and precise shaft positioning. The gimbal-type design combines a three-phase BLDC motor with 7 magnetic pole pairs and an integrated AS5600 magnetic encoder. The encoder measures the actual rotor position and provides feedback to an external motor controller. The motor is suitable for robotics, rotating mechanisms, stabilizers, automation and projects using Field-Oriented Control (FOC), including systems based on the SimpleFOC library.

                                p1209225-wiring%20-%202804.jpg

The MKS 2804 operates at a rated voltage of 12 V DC and has a speed constant of 220 KV, describing the relationship between rotational speed and voltage under no-load conditions. The motor phase resistance is 5.2 Ohm. The manufacturer specifies a motor body diameter of 34.5 mm and a motor section thickness of 14.6 mm. The motor windings connect through a three-pin connector to a suitable three-phase BLDC motor driver. An external power driver is required to energize and commutate the windings. Before operation, the control parameters must be configured according to the motor characteristics, particularly the number of pole pairs and permissible voltage.

The integrated AS5600 encoder provides contactless angular position measurement over a 360° range. The I2C interface enables 12-bit digital readings, corresponding to 4096 positions per revolution. The manufacturer also specifies a resolution of 1024 for analog readings. The encoder board, marked MKS AS5600 V3.0, provides DIR, SCL, SDA and PGO signals, power and ground connections, and a separate OUT connector for analog measurements. Rotor position feedback enables angular position and rotational speed regulation through a suitable controller. During integration, the motor's 12 V DC supply must be distinguished from the encoder supply voltage, according to the encoder pin markings.

The MKS 2804 design combines the motor with an attached encoder board. The motor body has a diameter of 34.5 mm, while the motor section is 14.6 mm thick. The manufacturer's dimensional drawing also shows a central opening with a diameter of 7.3 mm and three mounting holes with a diameter of 2 mm. The integration of the motor and position sensor supports installation in compact rotary mechanisms. The kit includes a 20 cm three-pin motor winding cable and two encoder cables, one 3-pin and one 6-pin, each measuring 30 cm. Motor operation requires an external three-phase BLDC driver and configuration of encoder position feedback.

Features

  • Motor specifications
    • Model: MKS 2804
    • Manufacturer: Makerbase
    • Motor type: brushless gimbal BLDC motor
    • Number of phases: 3
    • Rated motor voltage: 12 V DC
    • Speed constant: 220 KV (rpm/V)
    • Phase resistance: 5.2 Ohm
    • Number of magnetic pole pairs: 7
    • Motor body diameter: 34.5 mm
    • Motor section thickness: 14.6 mm
    • Central opening diameter: 7.3 mm
    • Three mounting holes with a diameter of 2 mm
  • Magnetic encoder
    • Sensor IC: AS5600
    • Encoder board marking: MKS AS5600 V3.0
    • Measurement technology: contactless magnetic field sensing
    • Measurement range: 360°
    • Digital resolution: 12 bits
    • Positions per revolution via I2C: 4096
    • Manufacturer-specified analog output resolution: 1024
    • Digital interface: I2C
    • Analog output: OUT
    • Encoder connections: DIR, SCL, SDA, PGO, 5/3.3 V, GND
    • Separate 3-pin connector: OUT, 5/3.3 V, GND
  • Connections and applications
    • Three-pin motor winding connector
    • 3-pin motor cable, 20 cm long
    • 3-pin encoder cable, 30 cm long
    • 6-pin encoder cable, 30 cm long
    • Designed for control using the FOC algorithm
    • Suitable for position and speed regulation systems
    • Integration with projects using the SimpleFOC library
    • Requires an external three-phase BLDC motor driver

Kit Includes

  • 1x Makerbase MKS 2804 BLDC motor with AS5600 encoder
  • 1x PH 2.54 to Dupont 3-pin motor connection cable, 20 cm, 26 AWG
  • 1x PH 2.0 to Dupont 3-pin connection cable, 30 cm, 26 AWG
  • 1x PH 2.0 to Dupont 6-pin connection cable, 30 cm, 26 AWG
1209225

Data sheet

Rotation speed
220 KV
Diameter
34,5 mm
Power supply voltage
12V
Height
14,6 mm
Weight
Other

Other products in the same category (16)