KAmodBT-HC05 - Bluetooth v2.0 + EDR module with HC-05 system
ID: 557976
zł49.90
Tax included
zł40.57 tax excl.
KAmodBT-HC05 is a Bluetooth module configured via AT commands. It has integrated LEDs indicating operating mode and connection status with the paired device, as well as a logic level translator on UART lines. KAmodBT-HC05
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The KAmodBT-HC05 module allows communication with Bluetooth 2.0 devices in master and slave mode. Thanks to the built-in stabilizer and translator of logic levels on the TxD / RxD lines, the module can be used in systems operating in the voltage range from 2.5 V to 5.5 V.
properties
- HC-05 system with integrated antenna, compliant with the Bluetooth v2.0 specification
- UART interface with programmable data rate (baudrate)
- Typical receiver sensitivity: -80 dBm
- Transmitted power level: up to +4 dBm
- Built-in voltage stabilizer
- Possibility of supplying voltage from the range 2.1 - 5.5 V
- Built-in level translator on UART interface lines (TxD, RxD)
- Built-in mode LED (MODE) and pairing device (PAR)
- Built-in button (going into configuration mode)
- The KEY and nRST signals are output to the connector
- Dimensions: 34.2 x 27 x 5 mm
Included
- Assembled module board
- Male 1xpin straight connector (solderable)
[Img-54486-left-large_default]
557976
You might also like
Bluetooth module v2.0 + EDR (master / slave), controlled by AT + commands with built-in antenna.
zł29.98
24h
Available quantity: 50
Available
Multifunctional expander (shield) for NUCLEO and Arduino equipped with Bluetooth 2.0+EDR (HC-05) interface, MEMS 3DoF LIS35, LED-RGB, joystick and analog STLM20 temperature sensor developed and produced by KAMAMI.
zł99.00
24h
Available quantity: 39
Available
The module with the HC-05 transceiver makes it easy to add Bluetooth communication to an existing project. The system is controlled by exchanging AT commands (UART bus). FC-114
zł41.83
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
zł107.21
24h
Available quantity: 13
Available
Evaluation Kit with Bluetooth 5.0 BT401. It is equipped with a microSD slot, microUSB connector and two audio outputs. DFRobot DFR0782
zł89.33
24h
Available quantity: 1
Available
Intel\'s AX210 wireless communication module. It supports 802.11AX Wi-Fi Generation 6E and Bluetooth 5.2, and comes with an M.2 A/E Key connector. Waveshare Wireless-AX210
zł131.91
24h
Available quantity: 2
Available
AW-CB375NF wireless communication module. It supports 802.11 a/b/g/n/ac Generation 5 Wi-Fi and Bluetooth 5.0 and features an M.2 A/E Key connector. Waveshare Wireless-AW-CB375NF
zł61.77
6 weeks
No product available!
Low Energy Bluetooth adapter module with USB 2.0 connector. allows communication with BLE devices
zł134.38
24h
Available quantity: 1
Available
Bluetooth module with integrated HC-08 system. Thanks to the angular pin connector with the bus signals, it is possible to easily connect the module to the contact plate or wires
zł58.78
24h
Available quantity: 4
Available
Expansion board with BlueNRG-M0 module compatible with Bluetooth v4.2. It is compatible with the ST morpho connector system (unmounted) and Arduino UNO R3. Communication with the module is via the SPI interface. STMicroelectronics X-NUCLEO-IDB05A2
zł72.93
24h
Available quantity: 5
Available
ModCC2540-A1 allows the use of Bluetooth transmission features BLE 4.0 - thanks to the built-in CC2540 chip, it is possible to create complex projects without the use of an additional microcontroller. modCC2540-A1
zł37.42
24h
Available quantity: 6
Available
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
zł16.53
24h
Available quantity: 98
Available
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48
4 weeks
No product available!
A module with a USB connector that supports WiFi communication (two frequency bands 2.4GHz and 5GHz) and Bluetooth 2.1/3.0/4.2. Dedicated to Odroid minicomputers. Odroid WiFi Module 5BK
zł67.06
24h
Available quantity: 10
Available
USB adapter for PC, allowing Bluetooth v4.0 communication with speeds up to 3Mb / s and range up to 20m
zł25.12
24h
Available quantity: 8
Available
HC-08 is a module operating in the Bluetooth Low Energy 4.0 standard. The system has a built-in antenna and small dimensions, and thanks to edge joints it can be surface soldered. The module is configured via AT commands
zł59.27
24h
Available quantity: 35
Available
Bluetooth 4.0 BLE module with UART serial interface. Controlled by AT commands, it can be supplied with the voltage from 3.6 V to 6 V. AT-09/HM-10
zł21.24
24h
Available quantity: 9
Available
Adafruit 2479 - Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)
zł98.99
24h
Available quantity: 3
Available
KAmodBT-HC05 is a Bluetooth module configured via AT commands. It has integrated LEDs indicating operating mode and connection status with the paired device, as well as a logic level translator on UART lines. KAmodBT-HC05