ESP32-D0WD - ESP32 integrated circuit with Wi-Fi and Bluetooth BLE from Espressif

A development board featuring the ESP32-C6 WROOM-1-N16 module from Espressif. It features a single-core RISC-V processor and a wide range of connectivity options, including 2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4). The module is Feather-compatible and provides 23 GPIO pins on 2.54 mm pitch connectors. SparkFun DEV-22924

A shield designed to collect data from the MyoWare 2.0 Muscle Sensor and transmit it wirelessly using the ESP32-WROOM module. Equipped with a built-in 40 mAh LiPo battery. SparkFun DEV-23387

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 512 kB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Version with soldered connectors. Waveshare ESP32-C6-Zero-M

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash and 512 KB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C6-Zero

ESP32 module board equipped with a 1.28-inch round display with touch panel. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with metal housing. Waveshare ESP32-S3-Touch-LCD-1.28-B

ESP32 module board equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with a metal housing. Waveshare ESP32-S3-LCD-1.28-B

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

Development board with ESP32-S3FH4R2 based on Xtensa 32-bit LX7 dual-core processor. It offers versatile wireless connectivity, including 2.4GHz Wi-Fi and Bluetooth LE. Equipped with 512 KB SRAM, 384 KB ROM, 2 MB PSRAM and 4 MB Flash memory, as well as a rich set of peripheral interfaces, the board is ideal for advanced technology projects and supports popular development environments such as ESP-IDF, MicroPython and Arduino IDE. It comes with a USB adapter. Waveshare ESP32-S3-Tiny-Kit

The ESP32-S3FH4R2 development board is based on the Xtensa 32-bit LX7 dual-core processor. It offers comprehensive wireless connectivity, including 2.4GHz Wi-Fi and Bluetooth LE. Equipped with 512 KB SRAM, 384 KB ROM, 2 MB PSRAM and 4 MB Flash memory, as well as a rich set of peripheral interfaces, the board is ideal for advanced technology projects and supports popular development environments such as ESP-IDF, MicroPython and Arduino IDE. Waveshare ESP32-S3-Tiny

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. modESPttgo1.14"-16MB

Development kit based on the ESP-WROOM-32 module, equipped with a dual-core 32-bit Tensilica LX6 microcontroller (up to 240 MHz), offers 2.4GHz WiFi and Bluetooth connectivity. Thanks to numerous interfaces (GPIO, SPI, I2C, UART), it is perfect for IoT projects, smart homes and remote control systems.

Evaluation board with ESP32-WROOM-32 module (Wi-Fi 2.4 GHz, Bluetooth 4.2 LE, Xtensa Dual-Core 240 MHz, 4 MB Flash), LAN8742 10/100 Mb Ethernet interface, IEEE 802.3af/at PoE power supply, USB-C USB-UART converter and 40-pin GPIO header compatible with Raspberry Pi standard. KAmodESP32 ETH+POE

The KAmod ESP32 POW+RS485 board equipped with the ESP32-WROOM32D 4MB (32Mb) module supports 2.4 GHz Wi-Fi, RS485 communication, also has a USB-UART converter, an efficient power supply system and a 40-pin connector compatible with Raspberry Pi, making it an ideal solution for home and industrial automation

ESP32-S3-Korvo-2 is an advanced AIoT development board with powerful AI acceleration and robust security features, ideal for smart homes and industrial automation. The board supports Wi-Fi and Bluetooth 5 (LE), enabling a wide range of wireless connections.

ESP32-S2-DevKitC-1 is a development board with Wi-Fi, ideal for IoT projects and breadboard prototyping. Espressif ESP32-S2-DevKitC-1-N8R2

ESP-PROG is an advanced tool for programming and debugging Espressif microcontrollers such as ESP32, ESP32-C3, ESP32-S2, ESP32-S3 and ESP8266. With the built-in FT2232HL USB bridge, ESP-PROG converts the USB 2.0 interface to serial and parallel interfaces, offering functions of automatic firmware download, serial communication and online debugging via JTAG