Shunt regulator 33V, 4Ohm, 9W
ID: 573073
5906623479580
zł49.89
Tax included
zł40.56 tax excl.
Shunt regulator with a constant voltage of 33V, bypass resistance 4Ohm and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3776
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Shunt regulator with a constant voltage of 33 V, bypass resistance of 4 Ohms and a total of 12 SMT shunt resistors on both sides of the PCB (higher power version). You can also add an external potentiometer to adjust the set voltage. The regulator is to protect the power supplies against voltage peaks generated by the motor controllers to which they are connected.
properties
- Voltage reference value: 33 V
- Shunt resistance: 4 Ohms
- 12 shunt resistors
- Maximum quiescent current: 0.5 mA
- Possibility to connect a potentiometer for voltage regulation
- Dimensions: 20 x 28.5 x 7.5 mm
- Weight: 2.8 g
573073
You might also like
Shunt regulator with a constant voltage of 13.2V, bypass resistance 1.33 Ohms and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3770
zł49.89
24h
Available quantity: 1
Available
Shunt regulator with a constant voltage of 13.2V, bypass resistance 1.5Ohm and a total of 32 SMT bypass resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3771
zł68.46
24h
Available quantity: 2
Available
The shunt regulator with a constant voltage of 26.4V, bypass resistance 4Ohm and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3774
zł49.89
24h
Available quantity: 2
Available
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a precision-adjustable set point (4 V to 35 V), a shunt resistance of 4.10 ohms, and a total of 32 SMT shunt resistors populated on both sides of the PCB.
zł97.63
24h
Available quantity: 1
Available
Other products in the same category (16)
Powerful DC motor driver. It allows you to control a motor with a power supply voltage in the range of 6 ... 28 V, the motor can draw current of 100 A (using a heat sink). For the control PWM modeling (eg from RC receivers) is used in robotics, small electric vehicles or wherever there is a need to control a DC motor. Digilent 410-334-1
zł467.81
4 weeks
No product available!
Available
The power module together with the engine controller has been specially created for the Romi Chassis chassis. With its help, we will supply all components of our construction and we will be able to control the engines responsible for the movement of the chassis. Pololu 3543
zł142.77
24h
Available quantity: 1
Available
Speech recognition module with Nuvoton ISD9160 system, microphone, Flash memory and speaker output. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020232
zł104.60
24h
Available quantity: 4
Available
No product available!
The GY-BMP280 is an atmospheric pressure sensor module. It allows measurement in the range of 300 ... 1100 hPa with an accuracy of 1 hPa. The sensor uses I2C or SPI bus
zł5.90
24h
Available quantity: 115
Available
Simple to use stepper motor driver, compatible with anything that can output a digital 0..5V pulse or 0..3.3V pulse. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. ROB-12779
zł87.16
24h
Available quantity: 2
Available
A single-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 2.2 A of current. Board with connectors for assembly. Pololu 5063
zł74.66
6 weeks
No product available!
Microphone preamplifier based on the AD828 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V
zł13.07
6 weeks
No product available!
Two-way speaker crossover with a division frequency of 3300 Hz. Works with 4 to 8 ohm speakers and offers up to 50 watts of power
zł34.67
24h
Available quantity: 13
Available
Lens for ArduCAM cameras with variable M12 lens designed for Raspberry Pi. It is characterized by a 8mm focal length, 40/45 ° view angle and 1/3 format. ArduCAM LS-8020
zł54.82
4 weeks
No product available!
MEMS MSM261S4030H0 microphone module designed to work with Sipeed MAix kits. The module is characterized by high sensitivity, low noise and low cost. Seeed Studio 107990153
zł16.61
24h
Available quantity: 3
Available
Industrial module with 4 relays with a load of up to 10 A. It uses the Modbus RTU protocol and the RS485 or RS232 communication interface. DFRobot FIT0827
zł155.02
4 weeks
No product available!
Module with bipolar stepper motor driver TC78H670FTG. It allows you to control the motor with an accuracy of 1/128 of a step with a voltage from 3.6 to 16 V and a current of up to 2 A. SparkFun ROB-16836
zł102.25
24h
Available quantity: 1
Available
Available
DC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034
zł186.32
24h
Available quantity: 1
Available
Shunt regulator with a constant voltage of 33V, bypass resistance 4Ohm and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3776