.png)
STEVAL-ESC002V1 - ESC speed controller module with STSPIN32F0A system
ID: 1202262
5902186333116
zł152.72
Tax included
zł124.16 tax excl.
A compact ESC module designed for BLDC motors, ideal for drones and mobile devices. Equipped with the STSPIN32F0A chip and ultra-low RDS(on) transistors, it provides efficient operation and currents up to 20A. It supports 2S–6S LiPo batteries and offers precise sensorless control thanks to BEMF detection. STMicroelectronics STEVAL-ESC002V1
Description
STEVAL-ESC002V1 is an extremely compact and fully ready-to-use reference Electronic Speed Controller (ESC) board designed for modern racing drones, inspection platforms, and other projects using BLDC brushless motors. Thanks to its small size and lightweight design, the board is perfect wherever minimal weight and dimensions are crucial. At its core lies the advanced STSPIN32F0A system-in-package, which integrates an STM32 Cortex-M0 microcontroller, gate drivers, and power management circuits in a single chip. This high level of integration simplifies design, reduces the number of components, and improves system reliability. The power stage based on STL140N6F7 MOSFETs delivers extremely low RDS(on) of just 2.8 mΩ, allowing continuous currents up to 20 A while maintaining high efficiency.
The board operates from 2S–6S LiPo batteries, offering a wide application range—from lightweight drones to more demanding propulsion systems. The integrated SEM (BEMF) detection circuitry provides precise sensorless control, while the built-in UART bootloader enables quick and convenient firmware programming. ST provides a complete software package, STSW-ESC002V1, which significantly accelerates development and allows users to focus on application logic. Additionally, a bright RGB LED is included for status indication. The design meets RoHS and 2006/66/EC standards, ensuring full compliance with modern safety and environmental requirements. Altogether, this makes the board an ideal solution for hobbyists, drone builders, and engineers seeking a stable, fast, and ready-to-use BLDC controller that combines compact size with high functionality.
Features
- Very compact and lightweight design
- Ideal for drones and mobile devices
- Sensorless six-step control – precise BLDC motor operation without Hall sensors
- Powered by 2S–6S LiPo battery packs
- Output current up to 20 A RMS using STL140N6F7 MOSFETs with low RDS(on) of 2.8 mΩ
- Integrated STSPIN32F0A controller with STM32F0 MCU, MOSFET drivers, and voltage regulators
- Built-in operational amplifiers for BEMF measurement
- Integrated UART bootloader for easy programming
- Compatible with STSW-ESC002V1 firmware, including ready-to-use control algorithms
- Built-in RGB LED for status indication
- Compliant with RoHS and 2006/66/EC standards
1202262
Data sheet
- ESC Firmware
- STSW-ESC002V1
- Output current
- 20 A
- Number of channels
- 1
- Supply voltage min
- 2S
- Supply voltages max
- 6S
- Mounting pattern
- Other
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
The A2212 2-4S 930KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S
zł41.36
24h
Available quantity: 4
Available
The A2212 2-4S 1000KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S
zł41.36
24h
Available quantity: 9
Available
The A2212 2-4S 1200KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S
zł42.07
24h
Available quantity: 10
Available
The A2212 2-4S 1400KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S
zł42.07
24h
Available quantity: 10
Available
Other products in the same category (16)
The 7A 1-2S BLheli_S XSD7A Miniature Brushless Motor ESC Controller is a compact, high-performance device ideal for controlling brushless motors in small projects. Thanks to its low weight and solid power, it is suitable for drones, RC models and other applications requiring precise motor control.
zł66.84
24h
Available quantity: 5
Available
A compact and powerful ESC speed controller designed for RC models and FPV racing, supporting 4S–8S LiPo batteries and a constant current of 60 A (instantaneous up to 70 A). With a 20x20 mm mounting standard, it ensures durability, reliability and easy integration even in limited space. The use of AM32 software and variable PWM frequency guarantees high precision and smooth operation of the motors in all conditions. F60A mini
zł660.71
24h
Available quantity: 1
Available
A compact and powerful ESC module for BLDC and PMSM motors, ideal for racing drones and lightweight aircraft. Featuring an STM32F303 microcontroller with sensorless FOC and advanced 3-shunt current measurement, it delivers smooth operation and high efficiency. It supports 3S–6S LiPo power, currents up to 20A RMS, and PWM, UART, CAN, and I²C communication for easy integration with flight controllers. STMicroelectronics STEVAL-ESC001V1
zł164.34
24h
Available quantity: 2
Available
A compact ESC module designed for BLDC motors, ideal for drones and mobile devices. Equipped with the STSPIN32F0A chip and ultra-low RDS(on) transistors, it provides efficient operation and currents up to 20A. It supports 2S–6S LiPo batteries and offers precise sensorless control thanks to BEMF detection. STMicroelectronics STEVAL-ESC002V1
zł152.72
24h
Available quantity: 2
Available
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
zł168.28
24h
Available quantity: 2
Available
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>
zł212.18
24h
Available quantity: 3
Available
This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.
zł476.42
24h
Available quantity: 10
Available
This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.
zł457.52
24h
Available quantity: 3
Available
Designed for small RC crawlers in 1/24–1/12 scale, this speed controller offers high performance and precise motor control. The device runs on ESCape32 firmware and supports DShot, PWM, Oneshot, and Multishot protocols, ensuring quick response and smooth power control. Maximum current is 50A continuous and 100A burst, and a built-in 6V/3A BEC powers the onboard electronics and servos. SEQURE ANT ESC 50A 2-3S
zł125.98
24h
Available quantity: 1
Available
4-in-1 ESC for FPV drones, supporting 2-6S LiPo/LiHV voltage and up to 65A continuous current (120A peak current). Equipped with a 32-bit AT32F421 microcontroller and AM32 firmware, it provides smooth motor control with PWM in the 8-128 kHz range. It supports popular protocols such as DShot600, DShot300, Oneshot, Multishot, and PWM, and also offers telemetry functionality. SEQURE Blueson A1 6S 65A AM32
zł154.25
24h
Available quantity: 3
Available
The SEQURE E130 G2 4-in-1 ESC provides high-current motor control for demanding FPV racing and freestyle drones powered by 4–8S battery packs. Support for modern communication protocols, ESC telemetry, and AM32 or BLHeli_32 firmware makes it suitable for high-performance multirotor builds. SEQURE E130 G2
zł515.14
24h
Available quantity: 1
Available
The SEQURE E130 G2 4-in-1 130 A 4–12S ESC with AM32 firmware provides high-current control for brushless motors in FPV drones powered by 4–12S battery packs. ESC telemetry, support for modern control protocols, and the standard 30.5 × 30.5 mm mounting pattern make it suitable for demanding racing and freestyle applications. SEQURE E130 G2
zł662.85
24h
Available quantity: 1
Available
The 4-in-1 electronic speed controller supports 4–8S LiPo and LiHV batteries and provides a continuous current of up to 160 A per channel. The STM32G071 processor, AM32 firmware, telemetry, integrated current measurement, and 16 V / 2 A BEC support use in racing, freestyle, and high-power FPV drones. SEQURE E160 G2 4-8S AM32
zł539.85
24h
Available quantity: 1
Available
The 4-in-1 electronic speed controller supports 4–12S LiPo and LiHV batteries and a continuous current of up to 160 A per channel. The STM32G071 processor, AM32 firmware, telemetry, current measurement, and 16 V / 2 A BEC enable use in high-power FPV multirotors. SEQURE E160 G2 4-12S AM32
zł616.89
4 weeks
No product available!
4-in-1 electronic speed controller designed for FPV racing and freestyle drones, supporting 2–6S LiPo and LiHV batteries and continuous current up to 65 A per channel. The 32-bit controller and AM32 firmware provide fast response, smooth motor control, and PWM frequencies up to 128 kHz. SEQURE Blueson A2
zł193.34
24h
Available quantity: 3
Available
High-performance 4-in-1 electronic speed controller designed for FPV racing and freestyle drones. It supports 2–8S LiPo/LiHV batteries, provides up to 70 A continuous current per channel and up to 150 A peak current. AM32 firmware and PWM frequency up to 128 kHz enable fast and smooth motor control. SEQURE E70 G2 AM32
zł393.56
24h
Available quantity: 3
Available
A compact ESC module designed for BLDC motors, ideal for drones and mobile devices. Equipped with the STSPIN32F0A chip and ultra-low RDS(on) transistors, it provides efficient operation and currents up to 20A. It supports 2S–6S LiPo batteries and offers precise sensorless control thanks to BEMF detection. STMicroelectronics STEVAL-ESC002V1