STEMMA QT PiCowbell Proto - prototype board for Raspberry Pi Pico
ID: 1182414
5906623431410
zł10.90
Tax included
zł8.86 tax excl.
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an area of 8x20 holes with a raster of 2.54 mm with marked pin labels, which greatly facilitates and improves the prototyping process. The board has a reset button and a STEMMA QT connector. The compact size makes it suitable for various types of prototype devices - both small IoT devices and robots, as well as larger constructions of mobile vehicles.
Features
- An area with prototype holes 8x20 squares
- Hole pitch: 2.54 mm
- Pin number labels
- Dimensions: 52 x 20.4 x 4.7mm
1182414
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 1680
Available
Other products in the same category (16)
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22656
zł107.85
24h
Available quantity: 2
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
zł233.07
24h
Available quantity: 2
Available
Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch
zł140.32
24h
Available quantity: 2
Available
The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232
zł23.85
24h
Available quantity: 13
Available
Module with a matrix LED RGB 7x16 display (112 LEDs) designed to work with the Raspberry Pi Pico. It communicates via a digital interface. Pimoroni PIM546
zł129.65
24h
Available quantity: 2
Available
Module with LCD TFT display with a diagonal of 1.8" and a resolution of 160x128 px. Communication via SPI interface. Waveshare Pico-LCD-1.8
zł39.72
24h
Available quantity: 4
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
zł54.53
24h
Available quantity: 2
Available
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
zł140.65
24h
Available quantity: 3
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
zł19.46
24h
Available quantity: 7
Available
Module with 3-color e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13-B
zł75.34
24h
Available quantity: 2
Available
A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091
zł356.61
24h
Available quantity: 1
Available
WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266
zł41.62
24h
Available quantity: 6
Available
Module with a black and white e-Paper display with a diagonal of 2.66" and a resolution of 296x152 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.66
zł76.09
24h
Available quantity: 1
Available
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł264.19
24h
Available quantity: 2
Available
Base board designed for Raspberry Pi Pico. Equipped with an LCD display, motors controller, buzzer and buttons and a breadboard. Pimoroni PIM550
zł148.60
24h
Available quantity: 3
Available
The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889
zł58.90
24h
Available quantity: 138
Available
Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200