

zł71.26 tax excl.
Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975
The FireBeetle 2 ESP32-S3 is a development board with the ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. The ESP32-S3 module offers a large memory capacity (it comes with 8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces to meet a wide range of application requirements. The board has a built-in camera interface for easy camera connection. An independent power circuit has also been designed to help reduce interference from other signals entering the camera. The board is equipped with the OV2640 sensor, which has a resolution of 2 MPx and a field of view of 68 °. The accelerator of neural network calculations and signal processing workloads provided by the ESP32-S3 chip makes the module an ideal choice for a wide range of applications such as speech recognition and image recognition.
FireBeetle 2 ESP32-S3 supports Wi-Fi and Bluetooth 5 (LE) dual mode communication. Both Bluetooth Mesh and Espressif WiFi Mesh protocols are supported for more stable communication and longer range. With support for the Matter protocol, the microcontroller can be used to develop industrial smart home devices for a wider range of IoT and AIoT (Artificial Intelligence of Things) scenarios. The development board is designed to be user-friendly and takes into account the complexity of screen wiring through the built-in GDI screen interface. Additionally, it integrates power management features that support battery charging and hardware power control. The FireBeetle 2 ESP32-S3 is programmable with Arduino IDE, ESP-IDF and MicroPython, allowing developers to use both C and Python.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A module with a MEMS microphone that will allow you to detect a voice, a clap or a door slam. The board has an analog output. DFRobot SEN0487
Module with the MiCS-5524 analog gas sensor. It allows you to measure the concentration of CO, CH4, 2H5OH, C3H8, C4H10, H2, H2S and NH3. DFRobot SEN0440
Carbon monoxide sensor module made in MEMS technology. It allows gas detection in the range of 5 to 5000 ppm and has an analog output. DFRobot SEN0564
A development board based on a dual-core RISC-V 400 MHz processor, supporting AI instructions, MIPI-CSI/DSI interfaces, and enabling image and voice processing. With an integrated ESP32-C6 module, it offers Wi-Fi 6 and Bluetooth 5 connectivity, as well as a USB OTG interface, microphone, TF slot, and 32 MB PSRAM for advanced IoT and AI applications. Its compact size and rich features make it ideal for smart cameras, interactive displays, and robotics. DFRobot DFR1172
Plate for applications in the area of Internet of Things (IoT). The module was based on the ESP8266 system, which integrates WiFi, TCP / IP communication, 32-bit MCU, 10-bit ADC and many interfaces such as HSPI, UART, PWM, I2C and I2S. DFrobot DFR0489
Development board based on the ESP32-S3-WROOM-1-N4 module, equipped with a 240 MHz Xtensa® LX7 processor, offering support for WiFi and Bluetooth 5.0, making it an ideal solution for IoT and AIoT projects. The module supports a wide range of peripheral interfaces and programming methods, such as Arduino IDE, ESP-IDF or MicroPython,. Thanks to the built-in AI acceleration, the board is perfect for applications such as voice recognition, text recognition or sensor data processing. DFRobot DFR1145
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Development board based on the ESP32-WROOM-32UE-N16R2 module, equipped with 16MB Flash and 2MB PSRAM, ideal for projects with a graphical user interface. It supports WiFi, Bluetooth, numerous peripheral interfaces (UART, I2C, SPI, I2S, DAC) and two power supply modes - USB-C and 3.7V battery - with an automatic switching function. Thanks to its compact dimensions, external antenna and support for Arduino IDE, ESP-IDF and MicroPython, it is perfect for IoT applications, automation and intelligent sensors. DFRobot DFR1140
A compact IoT board with a 160 MHz RISC-V processor, offering support for Wi-Fi 6, Bluetooth 5, Zigbee 3.0, Thread 1.3 and Matter. With a built-in lithium battery charger and voltage monitoring function, it is ideal for mobile and energy-saving applications. The board can act as both an end device and a network gateway, making it extremely versatile in modern smart home systems. DFRobot DFR1117
Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
Development board based on the ESP32-WROOM-32E-N16R2 module, equipped with 16MB Flash and 2MB PSRAM, ideal for projects with a graphical user interface. It supports WiFi, Bluetooth, numerous peripheral interfaces (UART, I2C, SPI, I2S, DAC) and two power supply modes - USB-C and 3.7V battery - with an automatic switching function. Thanks to its compact dimensions, built-in PCB antenna and support for Arduino IDE, ESP-IDF and MicroPython, it is perfect for IoT applications, automation and smart sensors. DFRobot DFR1139
Energy-efficient development board with a 32-bit RISC-V 160 MHz processor, designed for smart IoT and home automation applications. It supports modern communication protocols such as Wi-Fi 6, Bluetooth 5, Zigbee 3.0, Thread 1.3 and Matter, which allows easy integration with smart home systems. Thanks to compatibility with Arduino IDE, MicroPython and Gravity and Fermion sensors, the board offers great flexibility and ease of implementation in various projects. DFRobot DFR1075
IoT module with ATmega328P and BLE4.1 microcontroller. Compatible with the Bluno series, it can be programmed in the Arduino IDE. DFRobot DFR0492
Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975