.png)
- Out-of-Stock
RC_FC_KKMULTI_V55 – KKMulticopter v5.5 flight controller with power board and programmer
ID: 206920
5906623484843
KKMulticopter v5.5 flight controller designed for multirotor constructions such as quadcopters, tricopters or hexacopters. The board is based on the ATmega168 microcontroller and equipped with three ENC-03-RC gyroscopes providing stabilization in three axes. The set includes the controller, a power board and a programmer enabling firmware uploading.
Description
KKMulticopter v5.5 is a flight controller designed for multirotor models. The system is responsible for flight stabilization by analyzing data from three ENC-03-RC gyroscopes measuring movement in the roll, pitch and yaw axes. Information from the sensors is processed by the ATmega168 microcontroller, which appropriately corrects control signals sent to ESC controllers.
The controller has inputs for connecting an RC receiver and outputs for controlling motor ESC controllers or servos. The board also includes an ISP connector enabling microcontroller programming and installation of various firmware versions designed for the KKMulticopter platform.
The included power board allows convenient distribution of power to individual system components, and the programmer enables quick firmware uploading and controller configuration.. On the kkmulticopter.com website you can find many versions of the firmware and all the information needed to program and run the controller.
Features
- ATmega168 microcontroller
- 3 ENC-03-RC gyroscopes
- stabilization in roll, pitch and yaw axes
- 4 PWM inputs (3-pin) for RC receiver
- 6 PWM outputs (3-pin) for ESC controllers or servos
- ISP connector for microcontroller programming
- compatibility with KKMulticopter firmware
- power supplied through the power distribution board
The set includes:
- Flight controller
- programmer
- Power board
206920
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Kit for building a dog robot controlled by a wire with a switch. Totem TKR-DG
Retired
No product available!
Kit for building a giraffe robot controlled by a wire with a switch. Totem TKR-GRF
Retired
No product available!
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
Retired
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem
Retired
No product available!
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
Tact Switch 6.2x6.2mm, h = 5.5mm, 4-pin, straight, black, SMD
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
KKMulticopter v5.5 flight controller designed for multirotor constructions such as quadcopters, tricopters or hexacopters. The board is based on the ATmega168 microcontroller and equipped with three ENC-03-RC gyroscopes providing stabilization in three axes. The set includes the controller, a power board and a programmer enabling firmware uploading.