.png)
- Out-of-Stock
AVT988 A
ID: 193040
AVRISP PROGRAMMER - PRINTED PLATE
AVRISP PROGRAMMER - PRINTED PLATE
Producer: AVT
The AVR Studio environment offers the possibility of operating mainly "company" programmers; such as STK500 or AVRISP. Nothing, however, stands in the way of making a "pretend" layout under one of the company's designs. This is not a particularly difficult task, especially since Atmel has provided a communication protocol between the PC and the programmer, as well as a description of the signals necessary for correct programming of the processor.
The programmer consists of three main blocks: the FT232RL system which is the computer's USB port interface, the ATmega 8 microcontroller realizing all logic functions and the output buffer. The whole is powered directly from the USB interface line.
The device is especially recommended for electronics using AVR microcontrollers and the AVR Studio 4.12 programming environment
Selected parameters:
- compliance with the STK500V2 protocol
- direct support via AVR Studio 4
- computer interface - USB
- support for USB bus sleep mode
- programming processors in the system via the Atmel standard connector
- programming of un-mounted processors (with the use of stands)
- programming in systems with supply voltages in the range of 2.7-5V (below 2V without a guarantee)
- high programming speed
- power supply - from the USB port
- tile dimensions 60x41mm
- printed circuit board and documentation included
A version with a set of components for self-assembly is available
Detailed description in EP 7/07
Download
193040
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AB
Retired
No product available!
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AW
Retired
No product available!
Printed circuit board to secure - a simple car lock. AVT3187 A
Retired
No product available!
AVT kit for self-assembly protection - a simple car lock. AVT3187 B
Retired
No product available!
Printed circuit board for vapor extraction controller. AVT3215 A
Retired
No product available!
AVT kit for self-assembly of a vapor extraction controller. AVT3215 A
Retired
No product available!
Assembled fume extraction controller. AVT3215 C
Retired
No product available!
No product available!
No product available!
Development board with 8-core SoC chip Samsung Cortex-A53 Octa Core S5P6818 1.4GHz with built-in Ethernet, HDMI, camera interface and LCD display. The board includes a USB port, a serial port and a 40-pin GPIO connector. FriendlyELEC NanoPi Fire3
Retired
No product available!
NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 256MB RAM
Retired
No product available!
NanoPi NEO Core2, Allwinner H5 Quad-Core 1.5Ghz + 1GB RAM + 8GB eMMC, without soldered GPIO pins
Retired
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
Retired
No product available!
NanoPi NEO Plus 2 single board computer (SoC) with Allwinner H5 processor Quad-Core 1GHz + 1GB RAM + 8GB eMMC, SoC (ARM Cortex A-53)
Retired
No product available!
A small minicomputer with the SoC Allwinner H5 quad-core system (ARM Cortex-A53). The system has a built-in 16-core Mali450 graphics coprocessor. The computer is equipped with 512 MB DDR3 RAM. There are images of UbuntuCore and Armbian systems available for the computer. NanoPi NEO2
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2+ system, RAM memory with a capacity of 256 MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
AVRISP PROGRAMMER - PRINTED PLATE