- Out-of-Stock
2.13" (C) Color E-Ink e-Paper Display HAT for Raspberry Pi - Waveshare 14226
ID: 573327
2.13" e-Paper display module with 212x104 resolution. The display is connected to a small board with a 40-pin Raspberry Pi compatible connector. The module has the ability to display in three colors: black, white and yellow. Waveshare 2.13inch e- Paper HAT (C)
Description
The e-Paper display module with a diagonal of 2.13" and a resolution of 212x104. The display is connected to a small plate with a 40-pin connector compatible with Raspberry Pi. The module has the ability to display in three colors: black, white and yellow. The display has a built-in controller, communication is done using the SPI interface, has partial refresh functions, displays of this type are characterized by high contrast of the displayed image and low power consumption The module has a built-in voltage translator, making it compatible with 3.3 V and 5 V.
The module has support in the form of examples of use for such sets as Raspberry Pi/Jetson Nano/Arduino/STM32. Full module documentation is available on the Wiki page.
Features
- Screen size: 2.13"
- Resolution: 212×104
- Display color: yellow, black, white
- Gray level: 2
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.229 × 0.228
- Full refresh time: 15 sec
- Refresh power: 26.4 mW
- Standby power: <0.017 mW
- Viewing angle:> 170 °
- No backlight, displays the last content for a long time, even after turning off the power
- Low energy consumption
- Raspberry Pi 40-pin GPIO connector
- Built-in voltage translator, compatible with MCU 3.3 V/5 V
- Operating voltage: 3.3 V/5 V
- Display size: 23.71 x 48.55 mm
- Contour dimension: 65 × 30.2 mm
Kit contains
- 2.13inch e-Paper HAT (C)
- RPi screws pack (2pcs)
- PH2.0 20cm 8Pin
573327
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,13
- Resolution
- 212 x 104 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 113
Available
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 127
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 112
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
Other products in the same category (16)
Development kit with TLV493D sensor. The board has a built-in J-Link programmer, XMC1100 microcontroller (Cortex-M0, 64kB Flash memory, 16kB RAM) and a three-plane magnetic field sensor TL493D. TLV493D-A1B6 2 GO KIT
Retired
No product available!
Arduino. 36 projects for electronics enthusiasts; Simon Monk
Retired
No product available!
No product available!
Development board with 32-bit Intel® Quark ™ X1000 (400MHz) SoC and 256MB DDR3 memory. Features include compatible with Arduino UNO R3, built-in mini-PCI Express connector or Ethernet with PoE support. GALILEO2.P
Retired
No product available!
Acrylic computer case for Orange Pi PC / PC Plus / PC 2, transparent. Orange Pi
Retired
No product available!
The enclosure allows you to place a Raspberry PI B + / 2 computer and a 7 "touch screen in it, thus creating a compact design that can act as a tablet, presentation screen or operator panel. CBRPP-TS-BLK / WHT
Retired
No product available!
No product available!
Raspberry Pi Expansion/Evaluation Board, features various interfaces
Retired
No product available!
No product available!
Waveshare aluminum radiator for CPU Raspberry Pi B +, Raspberry Pi 2 and Raspberry Pi 3. Radiator has self-adhesive tape
Retired
No product available!
Easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity, and temperature. There are also connections to optional sensors such as wind speed/direction, rain gauge, and GPS for location and super accurate timing. DEV-12081
Retired
No product available!
Multi-channel thermometer for the computer, allows you to measure temperature in eight points, has waterproof probes with 1m long wires. AVTMOD15
Retired
No product available!
Compatible with Arduino UNO R3, Onboard MCU ATMEGA328P-AU. Waveshare: UNO PLUS
Retired
No product available!
No product available!
Capacitive Touch Keypad Designed for Raspberry Pi (all versions), 16 touch keys, Interface I2C
Retired
No product available!
2.13" e-Paper display module with 212x104 resolution. The display is connected to a small board with a 40-pin Raspberry Pi compatible connector. The module has the ability to display in three colors: black, white and yellow. Waveshare 2.13inch e- Paper HAT (C)