Products
Categories
- Main categories
-
- 3D PRINTING
- ARDUINO
- AUTOMATION
- BOOKS
- CYBERSECURITY
- DRONES
- EDUCATION
- ELECTRONICS
- Cables
- Cameras and accessories
- Communication
- Conductive materials
- Connectors
- ARK connectors (Terminal Block)
- Banana connectors
- Coaxial connectors (RF)
- Connectors
- Crocodile clip
- D-Sub drawer connectors
- DC power connectors
- FFC/FPC ZIF connectors
- Goldpin connectors
- IDC connectors
- JACK connectors
- JST connectors
- Jumpers
- Memory cards slots
- Other connectors
- Pogo pin
- Quick couplers
- RJ45 connectors
- Slip ring connector
- Supports
- USB connectors
- USB PD Adapters for Laptops
- WF connectors
- Cooling
- Displays
- Electronic modules
- A/D and D/A converters
- Audio
- Barcode readers
- CAN converters
- Converters USB - UART / RS232
- Cryptographic module
- Data logger
- DDS/PLL generators
- Digital potentiometers
- Encoders
- Expanders of the I/O
- Fingerprint readers
- Galvanic isolation modules
- HMI modules
- Image and video
- JTAG accessories
- Keyboards, buttons
- LED drivers
- Memory card readers
- Memory modules
- Modules with power outputs
- Motor controllers
- Power modules
- Protection modules
- RS485 converters
- RTC modules
- Servo Controllers
- TSOP infrared receivers
- USB Converters - I2C / 1-Wire / SPI
- Voltage converters
- Gadgets
- GPS
- Intelligent clothes
- LED - diodes, displays, stripes
- Luminous wires and accessories
- Machine vission (MV)
- Memory cards and other data storages
- Passive elements
- PC accessories
- Printers
- Programatory czasowe
- Prototype boards
- Relays
- Semiconductors
- A/C converters (ADC)
- Analog systems
- Audio systems
- Bridge rectifiers
- Button
- D/A Converters (DAC)
- Digital circuits
- Diodes
- Drivers of motors
- DSP microprocessors
- Energy counters
- Energy harvesting
- ESD security
- IGBT drivers and bridges
- Interface systems
- LED drivers
- Logic converters
- Memory
- Microcontrollers
- Optotriacs and optocouplers
- Other
- PLL generators
- Power systems
- Programmable systems
- Resetting systems
- RF systems
- RTC systems
- Sensors
- SoC systems
- Timery
- Touch sensors
- Transistors
- Sensors
- Accelerometers
- Air humidity sensors
- Air quality sensors
- Current sensors
- Distance sensors
- Flow sensors
- Gas sensors
- Gyroscopes
- Hall sensors
- Humidity sensors
- Infrared sensors
- Laser scanner
- Light and color sensors
- Liquid level sensors
- Magnetic sensors (compasses)
- Medical sensors
- Motion sensors
- PH sensors
- Position sensors
- Pressure sensors
- Pressure sensors
- Reflection sensors
- Sensors 6DOF/9DOF/10DOF
- Sensors of liquid quality
- Temperature sensors
- Vibration sensors
- Sound transducers
- Switches and buttons
- Cables
- FPGA DEVELOPMENT KITS
- MEASURING DEVICES
- Anemometers
- Cable testers
- Distance measurement
- Electronic loads
- Generators
- Insulation resistance meters
- LCR meters
- Logic analyzers
- Measures and calipers
- Multimeters
- Network analyzers
- Oscilloscopes
- Other meters
- Panel meters
- Radiation detectors
- Sound meters
- Temperature measurement
- Testery USB
- Voltage indicator
- Wattmeters
- Weights
- MECHANICS
- MINICOMPUTERS (SBC)
- POWER
- RASPBERRY PI
- Accessories for Raspberry Pi
- Audio video cables for Raspberry Pi
- Case Raspberry Pi
- Cooling for Raspberry Pi
- Displays for Raspberry Pi
- Extension modules for Raspberry Pi
- Memory cards for Raspberry Pi
- Power for Raspberry Pi
- Raspberry Pi 3 model A+
- Raspberry Pi 3 model B
- Raspberry Pi 3 model B+
- Raspberry Pi 4 model B
- Raspberry Pi 400
- Raspberry Pi 5
- Raspberry Pi 500
- Raspberry Pi cameras
- Raspberry Pi Compute Module
- Raspberry Pi model A/ B+/2
- Raspberry Pi Pico
- Raspberry Pi prototyping
- Raspberry Pi Zero
- Raspberry Pi Zero 2 W
- RETIRED PRODUCTS
- SALE
- STARTER KITS, PROGRAMMERS, MODULES
- Atmel SAM
- AVR
- Coral
- DFRobot FireBeetle
- ESP32
- ESP8266
- Feather / Thing Plus
- Freedom (Kinetis)
- M5Stack
- Micro:bit
- Nordic nRF
- Other development kits
- Peripheral modules
- PIC
- Raspberry Pi RP2040
- RFID
- RISC-V
- Seeed Studio LinkIt
- Segger programmers
- SOFTWARE
- Sparkfun MicroMod
- STM32
- STM32 Discovery
- STM32 MP1
- STM32 Nucleo boards
- STM8
- Teensy
- Universal programmers
- WRTNode
- XIAO/Qt PY
- Atmel SAM
- WORKSHOP
- Adhesives for hot glue guns
- Chemistry
- Agents for securing electronics
- Cleaning and preserving agents
- Compressed air
- Conductive paints and varnishes
- Distilled water
- Etcher
- Freezing
- Gas for lighters and burners
- Isopropyl alcohol (IPA)
- Label removers
- Lubricants, oils
- Pastes and adhesives thermally conductive
- PCB cleaning products
- Thermopads - thermally conductive tapes
- CNC milling machines
- Crimping tools
- Dispensing needles
- Gluers
- Glues
- Heat-shrink tubing
- Insulation strippers
- Knives
- Laboratory power supplies
- Microscopes
- Mini drills and grindrers
- Organizers
- Personal protection (OHS)
- Power tools
- Sandpapers
- Scissors
- Soldering
- Antistatic mats and accessories (ESD)
- BGA balls
- BGA rework stations
- Brushes and ESD brushes
- Desoldering Wick
- Handles, magnifiers
- Heat guns
- Heaters and soldering irons
- Laminates
- Portable soldering irons
- Silicone Soldering Mats
- SMD Accessories
- Soldering accessories
- Soldering chemistry
- Soldering irons
- Soldering pastes
- Soldering pots
- Soldering stations
- Soldering tips
- Sponges and cleaners
- Stand for soldering irons
- Tin
- Tin extractors
- Ultrasonic cleaners
- Tapes (aluminum, kapton, copper, insulating)
- Tools
- Tweezers
- Vices
- Workshop lighting
- 3D PRINTING
New products
New products New products
zł213.41 tax excl.
The autonomous tracker is designed for monitoring vehicles, trailers, machinery, tools, and other assets without their own power source. It combines GNSS positioning, 2G GSM/GPRS connectivity, Bluetooth LE, an integrated accelerometer, and Flash memory. The IP68 enclosure and Li-SOCl₂ battery support long-term operation in outdoor tracking applications. Teltonika TAT100
Description
Device Teltonika TAT100 uses a 2G GSM/GPRS module operating in the 850 / 900 / 1800 / 1900 MHz bands and a multi-system GNSS receiver supporting GPS, GLONASS, Galileo, and BeiDou. The receiver provides tracking sensitivity down to -165 dBm and positioning accuracy below 2.5 m CEP. The device features 128 MB Flash memory, internal GNSS and GSM antennas, and an integrated accelerometer used for motion detection and tracker wake-up.
TAT100 supports Bluetooth 4.0 LE, allowing communication with compatible Bluetooth sensors and beacons. The device provides periodic tracking while stopped or moving, a scheduler with time zones, Recovery mode, Backup Tracking, and static navigation. The IP68-rated enclosure protects the electronics against dust and water, making the tracker suitable for demanding outdoor applications.
The two-cell version is powered by a 7.2 V 2200 mAh Li-SOCl₂ battery pack with extremely low self-discharge. The battery is non-rechargeable and can be replaced when required. Device configuration and firmware updates can be performed through FOTA Web or Teltonika Configurator using the Micro-USB interface.
Features
- Manufacturer: Teltonika
- Model: TAT100
- Device type: autonomous GPS/GNSS tracker
- Cellular connectivity: 2G GSM/GPRS
- GSM bands: 850 / 900 / 1800 / 1900 MHz
- Maximum GPRS data rate: 85.6 kbps
- GNSS systems: GPS, GLONASS, Galileo, BeiDou
- GNSS channels: 33 tracking channels, 99 acquisition channels
- GNSS receiver sensitivity: down to -165 dBm
- Position accuracy: below 2.5 m CEP
- Bluetooth: 4.0 LE
- Bluetooth LE sensor support
- Teltonika EYE Sensor support
- Teltonika EYE Beacon support in Recovery mode
- Internal memory: 128 MB Flash
- Integrated accelerometer
- Internal GNSS antenna
- Internal GSM antenna
- Battery type: Li-SOCl₂
- Battery voltage: 7.2 V
- Battery capacity: 2200 mAh
- Non-rechargeable battery
- Extremely low battery self-discharge
- Ingress protection rating: IP68
- SIM card: Micro-SIM
- USB interface: Micro-USB 2.0
- Communication protocols: TCP, UDP, TLS, DTLS
- SMS support
- Periodic tracking on stop and in motion
- Scheduler with time zones
- Recovery mode
- Backup Tracking
- Static navigation
- Lost Bluetooth LE sensor detection
- Firmware updates via FOTA Web
- Configuration via Teltonika Configurator
- Configuration and diagnostics via SMS
- Time synchronization: GNSS, NITZ, NTP
- Dimensions: 78 × 63 × 28 mm
- Weight of two-cell version: 119 g
- Operating temperature with battery: -35°C to +75°C
Data sheet
- Device Type
- GPS Tracker
- CAN
- none
- Cellular Network Standard
- 2G GSM/GPRS
- WiFi module
- No
- GNSS
- Yes
- Bluetooth module
- Yes
- Accelerometer
- Yes
- Built-in Battery
- Yes
- Mounting Method
- Other
- Tightness class
- IP68
Other products in the same category (16)
A compact GPS/GNSS terminal with GSM/LTE Cat 1 connectivity, designed for real-time monitoring and tracking of objects. The device provides precise positioning thanks to a highly sensitive GNSS receiver and stable data transmission over the cellular network. Built-in 128 MB memory, Bluetooth 4.0, and a motion sensor enable advanced telemetry data recording and analysis. Teltonika FMC920
A compact GPS/GNSS terminal with GSM/GPRS connectivity designed for real-time monitoring and tracking of objects. The device provides precise positioning thanks to a GNSS receiver with sensitivity down to -165 dBm and supports data transmission over a cellular network. It is equipped with 128 MB of memory, a 3.7 V Li-ion battery, and digital/analog inputs and outputs enabling integration with vehicle systems and sensors. Teltonika FMB920
A compact 2G vehicle tracker mounted directly to the battery, enabling rapid deployment and real-time monitoring. It supports GNSS systems (GPS, GLONASS, GALILEO, BEIDOU), ensuring positioning accuracy of less than 2.5 meters and stable data transmission via GSM/GPRS. The device is equipped with an accelerometer for driving style analysis and incident detection, as well as a Bluetooth 4.0 LE module for integration with additional sensors. Teltonika FMT100
A GPS/GNSS tracker with 4G LTE Cat 1 and 2G GSM support, designed for precise, real-time vehicle monitoring. Its dual-band GNSS receiver (L1 + L5) ensures high positioning accuracy of less than 1.5 meters and stable operation even in challenging conditions. The device is equipped with Bluetooth LE, 128 MB of memory, and a backup battery, enhancing its functionality and security. Teltonika FMC880
A Bluetooth 4.2 identifier designed for real-time asset monitoring and location. It offers a range of up to 80 meters and a long battery life of up to 10 years depending on configuration. The device supports iBeacon and Eddystone protocols, and a built-in magnetic sensor allows for the detection of changes in position. Its durable IP67-rated housing and easy configuration via a mobile app make it a suitable solution for industrial, logistics, and IoT applications. Teltonika EYE Beacon
A GPS vehicle tracker with 4G LTE Cat 1 support and a wide 10-90V power range, ideal for fleet and industrial applications. The device offers precise positioning thanks to multi-GNSS support and high receiver sensitivity, ensuring reliable operation even in challenging conditions. A built-in accelerometer allows for driving style analysis and incident detection, such as collisions and sudden maneuvers. Teltonika FTC921
A 4G LTE Cat 1 GPS tracker designed for professional vehicle monitoring and fleet management. The device offers precise GNSS positioning and LTE, GSM, and Bluetooth LE connectivity, enabling reliable real-time tracking. A comprehensive set of inputs, outputs, and CAN bus support enable integration with vehicle systems and the reading of key parameters such as fuel consumption and engine health. Teltonika FMC130
A compact, plug-and-play 2G GPS tracker designed for quick installation in the OBD-II port without interfering with vehicle wiring. The device utilizes GNSS, GSM, and Bluetooth LE, ensuring precise vehicle tracking and stable, real-time data transmission. A built-in accelerometer enables driving style analysis and the detection of incidents such as collisions, towing, and sudden maneuvers. Teltonika FMB020
A plug-and-play 4G LTE Cat 1 GPS tracker designed for quick connection to the OBD-II port and advanced real-time vehicle monitoring. The device allows you to read OEM data from on-board systems, such as fuel level and mileage, and supports diagnostics of up to 32 vehicle parameters. GNSS, LTE, and Bluetooth LE ensure precise location and stable data transmission, while a built-in accelerometer detects collisions, towing, and driving style. Teltonika FMC003
The vehicle tracker plugs directly into a cigarette lighter socket and uses 2G GSM/GPRS connectivity, multi-constellation GNSS, and Bluetooth 4.0 LE. An integrated button, RGB indicator, buzzer, and USB-A port for charging external devices support vehicle monitoring and fleet management applications. Teltonika FMP100
The CAN adapter enables data retrieval from the CAN bus of passenger cars, light commercial vehicles, trucks, buses, and coaches. Depending on the vehicle model, it can provide parameters such as mileage, fuel level and consumption, engine speed, engine temperature, and vehicle speed. Teltonika LV-CAN200
The vehicle tracker combines GNSS positioning, 2G GSM/GPRS connectivity, and an integrated CAN processor for reading vehicle bus data. Bluetooth 4.0 LE, a 1-Wire interface, digital inputs and outputs, and Flash memory support fleet telematics, vehicle parameter monitoring, and integration with additional sensors. Teltonika FMB140
The autonomous tracker is designed for monitoring vehicles, trailers, machinery, tools, and other assets without their own power source. It combines GNSS positioning, 2G GSM/GPRS connectivity, Bluetooth LE, an integrated accelerometer, and Flash memory. The IP68 enclosure and Li-SOCl₂ battery support long-term operation in outdoor tracking applications. Teltonika TAT100
The vehicle tracker uses 2G GSM/GPRS connectivity, GNSS positioning, and Bluetooth LE for vehicle location monitoring and communication with compatible sensors and beacons. The IP67-rated enclosure, integrated 1800 mAh battery, and support for supply voltages from 6 V enable deployment in motorcycles, machinery, and vehicles operating in demanding environments. Teltonika FMB204
Compact tracker for monitoring equipment, personnel, animals, and other mobile assets; 4G LTE Cat 1 up to 10 Mbps download and 5 Mbps upload; 2G GPRS; GNSS with GPS, GLONASS, Galileo, and BeiDou; positioning accuracy below 1.8 m CEP; Nano SIM; 1000 mAh Li-Po battery; USB Type-C; accelerometer; movement-based and periodic tracking; scheduling; configurable alarm button; remote firmware updates via FOTA WEB; 128 MB Flash memory; IP65; operating temperature from -20°C to 60°C. Teltonika ATC700
The vehicle tracker uses 4G LTE Cat 1 connectivity and a multi-constellation GNSS receiver for collecting and transmitting telematics data. The IP69K-rated enclosure, 2600 mAh internal battery, and extensive input/output interfaces support deployment in commercial vehicles, machinery, and fleet management systems. Teltonika FTC164
The autonomous tracker is designed for monitoring vehicles, trailers, machinery, tools, and other assets without their own power source. It combines GNSS positioning, 2G GSM/GPRS connectivity, Bluetooth LE, an integrated accelerometer, and Flash memory. The IP68 enclosure and Li-SOCl₂ battery support long-term operation in outdoor tracking applications. Teltonika TAT100