IPS 1.69" HD LCD 240 x 280 display, ST7789v2 SPI driver

A small LCD panel with the ability to control its transparency. The panel can block up to about 95% of light. Adafruit 3627

The module with a color LCD display with a diagonal of 1.14". It has a resolution of 240x135 pixels and an ST7789 controller. Communication with the module is realized via the SPI interface. Waveshare 1.14inch LCD Module

IPS display module with a diagonal of 1.69" and rounded corners with a resolution of 240(H) x 280(V), with the ST7789 controller. It is characterized by a display area of 28 x 32.6 mm, operating temperature from -20 to 70°C and a logic voltage of 3.3 V

1.9inch Touch LCD is a compact IPS display with capacitive touch, designed for projects based on microcontrollers and single-board computers. Thanks to the SPI and I2C interfaces and built-in logic level conversion, it allows easy integration with platforms such as Raspberry Pi, ESP32, STM32, and Arduino.

Graphic LCD (Nokia 5110)

2.4 "TFT LCD display module with SD card slot. Resolution 240x320. Based on the ILI9341 controller. Powered by 3.3V or 5V.

Graphic LCD 122x32, 80x36mm, LED backlight WHITE, FFSTN, enhanced temperature range, NJU6450A controller

Graphic display 128x64 pixels with 1LED white backlight, 92x53.6 mm, extended temperature range, controller: ST7565R

Module with a 1.44 "color liquid crystal display and 128 x 128 pixel resolution The display has a built-in ILI9163C driver. Thanks to the pin connector, the module can be easily attached to the contact plate or wires 1.44 \'SPI 128 * 128 V2.1

Graphic LCD 128x64, 92x55mm, 1-LED pure green backlight, enhanced temperature range, 3V, NT7532 controller, built with COG display

LCD graphic display with 128 x 64 resolution, black content, white backlight, based on RA8808 controller.

LCD graphic display 128x64, KS0108 LCD controller, NEGATIVE BLUE, LED backlight (white), 1x20 pin header for evaluation boards

LCD graphic display 240x64 pixels, 180x65mm, LED backlight (yellow-green), T6963C controller, SAP1024B built-in character generator

Graphic LCD 240x64 with LED backlight (White), FSTN, character generator, negative voltage generator, T6963C controller

The STN 128×64 display in negative blue mode with a TOSHIBA T6963C controller enables easy control of graphics and text. Thanks to its extended temperature range and LED backlight, it is suitable for industrial, mobile, and devices operating in variable environmental conditions.

2.2 inch TFT round display module. Screen refresh rate up to 256 ms. DFRobot DFR0529