WSH 0.96inch OLED (B)
ID: 559799
5906623421480
zł31.13
Tax included
zł25.31 tax excl.
0.96inch OLED, SPI/I2C interfaces, straight/vertical pinheader
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Key Parameters
| Driver Chip | SSD1306 |
|---|---|
| Interface | 3-wire SPI, 4-wire SPI, I2C |
| Resolution | 128*64 |
| Display Size | 0.96inch |
| Colors | Yellow, Blue |
| Visible Angle | >160° |
| Dimension | 33mm*33.50mm |
| Operating Temp. (?) | -20~70 |
| Storage Temp. (?) | -30~80 |
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
Hardware Config
| Mode/Interface | BS0/BS1 | DIN | SCK |
|---|---|---|---|
| 3-wire SPI | 1/0 | MOSI | SCLK |
| 4-wire SPI | 0/0 | ||
| I2C | 0/1 | SDA | SCL |
Ordering Info
The 0.96inch OLED provides 2 options for the onboard pinheader:
- 0.96inch OLED (A): curved/horizontal pinheader
- 0.96inch OLED (B): straight/vertical pinheader
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/0.96inch_OLED_(B)
Dimension
-
Weight: 0.005 kg
- 0.96inch OLED (B) x 1
559799
Data sheet
- Screen type
- OLED graphic
- Diagonal (inch)
- 0,96
- Resolution
- 128 x 64 px
- Interface
- SPI/I2C
- Touch
- No
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
- 0.96inch OLED, SPI/I2C interfaces, curved/horizontal pinheaderzł35.99 24hAvailable quantity: 2 Available
- 1.3inch OLED display HAT for Raspberry Pi, 128x64 pixels, SPI/I2C interfacezł41.55 24hAvailable quantity: 9 Available
Other products in the same category (16)
- 0.96inch OLED, SPI/I2C interfaces, curved/horizontal pinheaderzł35.99 24hAvailable quantity: 2 Available
Module with OLED display, 2.23" diagonal and 128x32 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-2.23
zł59.93 24hAvailable quantity: 27 AvailablePhoton Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. DEV-13628
zł126.27 24hAvailable quantity: 2 AvailableModule with a black and white, flexible OLED display with a diagonal of 1.81" and a resolution of 160x32 pixels. Communication via the SPI interface. SparkFun LCD-14606
zł367.50 24hAvailable quantity: 1 AvailableOLED display with a diagonal of 2.4" and a resolution of 128x64 pixels. Displays the content in white. Uses the SSD1309 driver and communicates via the SPI or I2C bus. Waveshare 2.42inch OLED Module
zł73.89 4 weeks No product available!
Monochrome OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. The display has a built-in SSD1306 controller, communication via the I2C interface. DFRobot DFR0648
zł48.14 24hAvailable quantity: 2 AvailableA 0.91-inch OLED display that offers a resolution of 128x32 pixels and the ability to display up to four lines of text. It communicates via an I2C interface and uses popular Qwiic connectors. SparkFun LCD-24606
zł57.72 24hAvailable quantity: 1 AvailableThe module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374
zł97.45 24hAvailable quantity: 1 AvailableModule with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.78 6 weeks No product available!
OLED display 128x64 pixels, 0.96 ", 3V power supply, SSD1306 controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
zł19.40 6 weeks No product available!
QLED IPS 15.6" display with touch panel and Quantum Dot technology. Equipped with HDMI interface for image display and USB for touch panel. Resolution 1920x1080 pixels. Waveshare 15.6HP-CAPQLED-EU
zł958.13 4 weeks No product available!
A module with a 0.96" OLED display with a resolution of 128x64 pixels dedicated to the BBC micro:bit platform. It allows easy connection of the micro:bit without additional mounting thanks to the built-in edge connector. The display uses the SSD1306 controller operating with the I2C interface, and the board has pads for splitting the I2C lines and additional pins for connecting sensors, which allows for the expansion of the module with new functions. Kitronik provides dedicated blocks and sample code for the MakeCode and MicroPython editors. Kitronik 56115
zł72.93 24hAvailable quantity: 5 AvailableOLED display resolution 128x32 pixels, yellow letters on a black background (yellow), 3V power, SSD1306 driver, communication via SPI interface, working temperature from -40 to +70.
zł24.99 24hAvailable quantity: 5 AvailableThe 1.27 "OLED display module (128x96 pixels), 16-bit color, SSD1351 driver with SPI interface. The module is equipped with a micro-SD card slot. Compatible with 3.3V and 5V systems. Adafruit 1673
zł206.07 24hAvailable quantity: 1 AvailableModule with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020452
zł89.67 24hAvailable quantity: 2 AvailableA small monochrome OLED display with a diagonal of 1.3 inches and a resolution of 128x64 pixels. Displays text in white on a black background. It is equipped with an I2C interface and uses the popular Qwiic connector. SparkFun LCD-23453
zł70.13 24hAvailable quantity: 2 Available
0.96inch OLED, SPI/I2C interfaces, straight/vertical pinheader