Pico DVI Sock - adapter with a DVI connector for Raspberry Pi Pico
ID: 585169
zł37.93
Tax included
zł30.84 tax excl.
Adapter with a DVI connector designed for the Raspberry Pi Pico. It can transmit DVI-D video signal. Pico DVI Sock
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Adapter with a DVI connector designed for the Raspberry Pi Pico. It enables the transmission of DVI-D video signal via a board with the RP2040 chip. The adapter is soldered to the Pico connector using the SMT pads on the opposite side to the USB connector in such a way that the remaining pins can be freely used for other purposes.
Attention!
The kit does not include the Raspberry Pi Pico board.
585169
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł20.90
24h
Available quantity: 174
Available
Other products in the same category (15)
Expander with two I2C connectors and one SPI for Raspberry Pi Pico. It has sockets compatible with Pimoroni Breakout modules. Pimoroni PIM547
zł45.26
24h
Available quantity: 1
Available
A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091
zł356.61
24h
Available quantity: 2
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Pimoroni PIM555
zł78.76
24h
Available quantity: 2
Available
Base board designed for Raspberry Pi Pico. Equipped with numerous connectors, audio output, buzzer, micro SD slot, buttons and LEDs. Cytron MAKER-PI-PICO-NB
zł44.90
6 weeks
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Pimoroni PIM556
zł49.32
24h
Available quantity: 4
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
zł69.22
24h
Available quantity: 2
Available
This universal expansion board for the Raspberry Pi Pico extends GPIO pins to both male and female goldpin connectors and screw terminals with labeled pins, facilitating and accelerating prototyping without the need for soldering
zł38.88
24h
Available quantity: 94
Available
Universal expansion board with screw connectors dedicated to Raspberry Pi Pico. Facilitates the creation of device prototypes
zł90.70
24h
Available quantity: 4
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. SB Components 21352
zł76.95
24h
Available quantity: 2
Available
The expansion board for the Raspberry Pi Co allows you to connect to Pico HAT overlays designed for full-size Raspberry boards, and KAmod I2C series modules.
zł29.91
24h
Available quantity: 206
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
zł45.57
24h
Available quantity: 2
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł30.00
24h
Available quantity: 2
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (male and female) of 2x20 pins. DFRobot DFR0836
zł20.22
24h
Available quantity: 2
Available
An expansion board designed for the Raspberry Pi Pico. The board has 13 GPIO pins, 3 ADCs, UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0848
zł24.85
24h
Available quantity: 10
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł39.82
24h
Available quantity: 7
Available
Adapter with a DVI connector designed for the Raspberry Pi Pico. It can transmit DVI-D video signal. Pico DVI Sock