KAmodWS2812-1 - module with RGB WS2812 diodes
ID: 558151
5906623432530
zł7.40
Tax included
zł6.02 tax excl.
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1
Description
KAmodWS2812-1 module allows to create lighting effects of any color, and thanks to the controller built into the WS2812 diode, it is possible to combine modules into rows, creating any shapes. Regardless of the number of connected LEDs, the control is transmitt with using one signal cable.
Features
- Tri-color LED (RGB) WS2812 type, with embedded controller
- Possibility of series connection of additional modules without extra signal lines
- Each of basic colors can controlled with up to 256 brightness levels
- Possibility of displaying more than 16.7 mln light tone
- Power supply voltage: 5...7V
- Wire that connects two modules can be up to 5m length without additional amplifier
- Holes for soldering of pin connector
- Two mounting holes 3mm
- Module size (without connectors): 18mm x 11.5mm x 3.5mm
Example application KAmodWS2812-1 and KAmduino UNO
Kit content
- KAmodWS2812-1 module
- Two 3-pin connectors (male straight) for soldering
558151
Data sheet
- Voltage
- 5 - 7 V
- Colour
- RGB
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
zł1.16
24h
Available quantity: 2227
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.26
24h
Available quantity: 3
Available
Other products in the same category (16)
Kitronik 2712 is a red LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
zł22.73
24h
Available quantity: 10
Available
RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721
zł40.47
24h
Available quantity: 1
Available
Module with two white diodes. Dedicated to Voron 3D printers as hotend and printing nozzle lighting
zł14.91
24h
Available quantity: 3
Available
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 14
Available
Crowtail-LED Bar 2.0 is a compact data visualization module with 10 LED segments, intended for projects based on Arduino and the Crowtail system. It enables graphical representation of levels and values, and thanks to the cascading function it is suitable for more advanced indicators and light animations.
zł23.53
24h
Available quantity: 4
Available
Module with yellow LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-Y
zł10.04
24h
Available quantity: 1
Available
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
Regular pricezł87.54zł76.62
24h
Available quantity: 1
Available
Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-W
zł6.30
24h
Available quantity: 2
Available
This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260
zł43.46
24h
Available quantity: 1
Available
The WS2813B PLCC-6 LED diode integrates an RGB chip and controller in a single 5050 package, supports a dual signal line with transmission continuity function, and a 24-bit color depth. Used in lighting installations, peripheral devices, and multimedia systems.
zł1.89
24h
Available quantity: 200
Available
Bright white SMD 3528 LED module. DFRobot DFR0438
zł10.22
24h
Available quantity: 3
Available
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
zł21.33
24h
Available quantity: 2
Available
A small module for learning how to solder. It allows you to build a small device with two LEDs that turn on when the light intensity changes
zł14.58
24h
Available quantity: 4
Available
The Mini LED 5V module is designed to fit into a 20mm diameter interior. It is designed to have power requirements that are within the power limits of a computer\'s USB port (5V and well below 100mA). Kitronik 35137
zł7.59
24h
Available quantity: 4
Available
Module with RGB LED, adapted to operate with a voltage of 5 V. Ideal for applications such as decorative lighting, visual effects or microcontroller projects
zł2.90
4 weeks
No product available!
Kitronik 2766 is a yellow LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
zł23.16
24h
Available quantity: 5
Available
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1