![Aluminum mounting profile for LED strips, U-shaped, black with a milky cover Aluminum mounting profile for LED strips, U-shaped, black with a milky cover](https://kamami.pl/48819-large_default/aluminum-mounting-profile-for-led-strips-u-shaped-black-with-a-milky-cover.jpg)
![Aluminum mounting profile for LED strips, U-shaped, black with a milky cover Aluminum mounting profile for LED strips, U-shaped, black with a milky cover](https://kamami.pl/48819-large_default/aluminum-mounting-profile-for-led-strips-u-shaped-black-with-a-milky-cover.jpg)
zł13.54 tax excl.
Aluminum mounting profile for LED strips. It is U-shaped, black in color with a milky mask
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Aluminum mounting profile dedicated to LED strips up to 10 mm wide. It is easy to install, incl. with glue or thanks to the handles included in the set.
Provides protection against dirt. The LEDs are covered with a special cover made of polycarbonate, which ensures good light diffusion. The profile can be mounted both on the surface and built into prepared recesses.
The profile is not waterproof, therefore it can be used for lighting installations inside buildings and in places not exposed to direct weather conditions.
Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Corner connector for U-shaped mounting profiles. In black
This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control
LED diode 10LED red - bargraph, replacement for: DC-10EWA
No product available!
LED matrix display, consisting of 40 light-emitting diodes type WS2812 (5 lines, 8 kolumm), allows you to create interesting lighting effects using one control line. Adafruit 1430
No product available!
Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461
No product available!
8x16 LED matrix equipped with colored LEDs and a driver. It is powered by 5 V and communicates via the I2C interface (Gravity connector). DFRobot DFR0522
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °
LED diode 10LED two-colored - bargraph, ultra-10mcd (4mA) - max: 40mcd (20mA), ultragreen 10mcd 4mA) - max: 40mcd (20mA)
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316
5 mm green LED. 1000 pieces in the package
Tape with RGB LEDs WS2812B 1m long, 144 LEDs per meter, the diodes are mounted on a flexible white PCB. The diodes are not protected against water.
No product available!
Pink LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
5 m long LED strip with 100 purple LEDs. It is powered with the voltage of 12 V through the DC connector 5.5 x 2.1 mm. DFRobot FIT0385-P
LED strip with COB diodes in red. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
Aluminum mounting profile for LED strips. It is U-shaped, silver in color with a milky mask
3 mm LED matrix. The matrix contains 35 LEDs (5x7 system) in red. The diodes are connected by a common cathode.
Aluminum mounting profile for LED strips. It is U-shaped, black in color with a milky mask