LED-AB-AS102510AS-B - LED diode 10 LED red

Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472

Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013

Module of four integrated 8x8 LED (color red) matrixes based on the MAX7219 controller. Module controlled by the SPI interface.

Adafruit 1312

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Adafruit 322

LED display module with three LEDs in red, yellow and green. Perfect to be used as a traffic light

LED diode 10LED yellow - bargraph, replacement for: DC-10YWA

Adafruit 2226

Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461

Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED

Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24

COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °

The Led 16x16 WS2812 matrix is made of flexible material on which RGB LEDs are arranged in the form of 16 rows and 16 columns, one microcontroller pin is enough to operate them. Each pixel can emit color from a 24-bit palette.

Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control

RGB WS2812B LED matrix with 1mm pitch