LED Charlieplexed Matrix - 9x16 LEDs - BLUE

LED matrix display module (in red color) with an organization of 14 columns x 9 lines, compatible with Arduino.

This 40-pin GPIO module for the Raspberry Pi features 128 red LEDs arranged in a 16x8 grid. Using the IS31FL3731 driver communicating over the I2C bus, each LED can be independently controlled with 8-bit brightness control, enabling smooth animations and lighting effects. The module stores up to eight frames of animation in RAM and utilizes Charlieplexing technology, offering efficient control with a minimal number of pins. Adafruit 6115

IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. BLUE matrix. Adafruit 3137

RGB LED matrix display with a resolution of 64x64 (4096 LED). It has cutouts at an angle of 45° to build an LED cube. Adafruit 5407

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: RED. Adafruit 2947

LED matrix display, consisting of 40 LEDs WS2812 type (5 lines, 8 kolumm), allows you to create interesting lighting effects using one control line

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM335

Flexible 8x32 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0462

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM491

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM336

The Led 16x16 WS2812 matrix is made of flexible material on which RGB LEDs are arranged in the form of 16 rows and 16 columns, one microcontroller pin is enough to operate them. Each pixel can emit color from a 24-bit palette.

A circular board for the BBC micro:bit with 24 addressable ZIP LEDs, offering a full color spectrum and allowing for the creation of eye-catching lighting animations. Mounts directly to the micro:bit using screws, and additional pins allow for the connection of sensors or additional LEDs. Power is supplied via a JST socket or solder pads, and the built-in regulator also powers the micro:bit. The ZIP Halo is fully compatible with NeoPixel libraries and can be programmed in MakeCode or MicroPython. Kitronik 5625

Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control

8 x 8 dot dot matrix module, MAX7219 controller, RoHS

Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461

Module with 117x7 LED matrix display (77 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM442