Compact, 4-channel logic analyzer with a sampling frequency of 100 MHz...
A set of accessories for building a retro console based on the Raspberry...
Power cord with a length of 20 cm with SATA and XH2.54 plug. It allows...
12V relay module with a radio receiver in a set with a remote control...
Bluetooth 4.0 module based on the CSR8635 chip designed for Bluetooth...
DC-DC Step-Down converter module with an output voltage of 3.3V and a...
Laser distance meter with a range of up to 120m and a resolution of 1mm....
Laboratory multimeter that allows you to measure AC and DC voltage, AC...
Simulation set for Siemens S7-1200 PLC devices. Using this set, it is possible to verify the operation of a program written for a PLC by applying the appropriate states to the digital inputs, to the analogue (ADC) inputs voltages from the built-in or external sensors. LED status monitoring is possible.
|Number of outputs||8|
|Number of inputs||none|
|Power supply voltage||24V DC|
KA-S71200-IO-Simulator is a complete set simulating the environment of a typical PLC from the Siemens S7-1200 family. Using this set, it is possible to verify the operation of a program written for a PLC by providing:
The states of digital outputs are monitored by means of LEDs.
KA-S71200-IO-Simulator - environment simulator for Siemens S7-1200 PLC
The set is especially recommended for automation and learning learners of programming PLC controllers who want to test written applications without tediously connecting all required sensors.
The set is designed to work with controllers of the Siemens S7-1200 family with a maximum number of 8/2 digital / analog inputs and a maximum of 6 digital outputs (in DC/DC/REL and DC/DC/DC versions). Operation of the set has been verified with the following controllers: CPU1211C DC/DC/DC (available in the promotional offer: 6ES7211-1AE40-0XB0 and promotional for education: 6ES7211-1AE40-0XB0) and CPU1212C (6ES7212-1AE40-0XB0).
If you want to use the set with another model of the controller from the Siemens S7-1200 family, you should verify the compatibility of the set with it.
We provide a simple test program prepared in the TIA Portal 15.1 environment in versions for CPU1211C and CPU1212C controllers. The program allows you to test all the peripheral elements of the set, the role of test selectors is played by switches DI.4 and DI.5 according to the table below. A detailed description of the tests is available in the documentation.
KA-S7-1200-IO-Simulator - example of simple program (TIA Portal) for testing
Functional tests included in the test program:
|0||0||Verification of correct operation of input adjusters DI.x (x=0..5)|
|0||1||Verification of the operation of the light sensor and potentiometer (wejście AI.1)|
|1||0||Verification of operation of the Wheatstone bridge and temperature sensor (wejście AI.0)|
|1||1||Encoder operation verification|