zł30.79 tax excl.
Two-channel relay module designed for independent control of two AC or DC loads using a microcontroller. Each of the two relays supports loads of up to 10 A at 250 V AC or 10 A at 30 V DC, while the control circuit is compatible with 3.3 V and 5 V logic levels. Soldered 333023
The board is equipped with 2 electromechanical relays for independently switching two AC or DC circuits. The maximum switching parameters for each relay are 250 V AC / 10 A or 30 V DC / 10 A. The integrated control circuit allows operation with microcontrollers using 3.3 V and 5 V logic levels, including Arduino platforms.
The 2.54 mm pin pitch allows the board to be used in prototype circuits, while two independent channels can control lighting, motors, solenoid valves, and other AC or DC loads. The mounting holes are compatible with LEGO spacing. The board measures 54 x 38 mm.
Data sheet
Single-channel relay module equipped with a Qwiic interface, designed for controlling AC and DC loads using a microcontroller. The relay supports loads of up to 10 A at 250 V AC or 10 A at 30 V DC, while the Qwiic connector allows the module to be connected without soldering using a suitable cable. Soldered 333021
Four-channel relay module designed for independent control of four AC or DC loads using a microcontroller. Each of the four relays supports loads of up to 10 A at 250 V AC or 10 A at 30 V DC, while the control circuit is compatible with 3.3 V and 5 V logic levels. Soldered 333022
Single-channel relay module designed for controlling AC and DC loads using a microcontroller. It supports loads of up to 10 A at 250 V AC or 10 A at 30 V DC and can be controlled using 3.3 V and 5 V logic signals. Soldered 333024
Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136
No product available!
Module with 2 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital inputs. Seeed Studio 103020134
Module with relay SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital input. Seeed Studio 103020137
No product available!
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
No product available!
Extension module designed for home automation projects compatible with Raspberry Pi. The board is equipped with a 24 V 2 A relay, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM487
Extension module compatible with Raspberry Pi. The board is equipped with three 24 V 2 A relays, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM213
Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
Industrial module with 4 relays with a load of up to 10 A. It uses the Modbus RTU protocol and the RS485 or RS232 communication interface. DFRobot FIT0827
No product available!
5V relay module with IR receiver. Comes with a remote control
Module with a 12 V relay and a timer. It enables the implementation of delayed switching on or off of the circuit with the possibility of time adjustment
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
The module is dedicated to home automation based on the Raspberry Pi. It allows you to control two devices 250VAC/7A or 30VDC/10A, providing isolation with an optocoupler. SB Components 21932
8-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. With LCD 4,3" display. SB Components 21871
8-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21871
Two-channel relay module designed for independent control of two AC or DC loads using a microcontroller. Each of the two relays supports loads of up to 10 A at 250 V AC or 10 A at 30 V DC, while the control circuit is compatible with 3.3 V and 5 V logic levels. Soldered 333023