zł676.07 tax excl.
Module with a satellite data receiver for transmission with L-band correction. It can be configured for use with various correction services to achieve centimeter-level positioning accuracy. SparkFun GPS-19390
Satellite receiver module for L-band corrected transmission. Can be configured for use with a variety of correction services, including U-blox's PointPerfect GNSS satellite augmentation service, which provides uniform coverage across the US and Europe. With an unobstructed view of the sky, it decodes the satellite transmission and outputs a correction stream, enabling a multi-band precision GNSS receiver (such as the u-blox ZED-F9P) to achieve centimeter-level positioning accuracy. The board is equipped with two Qwiic connectors and a USB Type-C connector, so you can connect the board to a computer and configure the device using the u-blox u-center. An additional SMA connector ensures a secure connection with the L-band antenna, and the power supply, I2C, UART1, UART2 and SPI are led out to goldpin pins with a pitch of 2.54 mm. Full documentation is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. SparkFun GPS-16481
No product available!
GNSS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-21305
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
No product available!
Module with GNSS PA1616D receiver based on the MTK3333 chip. Supports GPS and GLONASS positioning systems. Adafruit 5440
GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. SparkFun GPS-15136
No product available!
The module is equipped with the LTE-M/NB-IoT u-blox SARA-R510M8S system. It allows you to monitor devices remotely. SparkFun GPS-18031
No product available!
Advanced 4G LTE CAT4 modem with GNSS function, supporting GPS, Beidou and GLONASS, ideal for localization and communication applications. With support for multiple LTE, WCDMA and GSM bands and UART and USB interfaces, the module is compatible with platforms such as Raspberry Pi, Arduino or LattePanda. It enables data transmission, voice calls and SMS messages, and also supports TCP/IP, HTTPS and FTP network protocols, making it a versatile solution for IoT projects, vehicle tracking and security systems. DFRobot TEL0162
The NEO-F10N GNSS module, which uses L1/L5 bands, offers metro-level location accuracy. It provides better performance in challenging urban environments. It supports simultaneous acquisition of signals from three GNSS constellations: GPS, Galileo, and BeiDou. SparkFun GPS-24114
Compact GNSS Module Integrated with Patch Antenna MT3333 Solution, Quectel, RoHS
Adafruit 1059 - Flora Wearable Ultimate GPS Module
Crowtail – GPS is a compact positioning module with a NEO-6M receiver and a UART interface, designed for projects using GPS technology. It offers high reception sensitivity and a wide range of configurable transmission parameters.
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports the RTK function as a base station. Waveshare LC29H(BS) GPS/RTK HAT
Extension board designed for MicroMod main modules. Equipped with the ZED-F9P GNSS receiver. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. SparkFun DEV-17722
No product available!
Module with a satellite data receiver for transmission with L-band correction. It can be configured for use with various correction services to achieve centimeter-level positioning accuracy. SparkFun GPS-19390