GPS Receiver - GPS receiver with GP-735 module
ID: 588716
zł265.05
Tax included
zł215.49 tax excl.
The GPS receiver is equipped with a GP-735T module. It is supplied with the voltage from 3.3 to 5.5 V and communicates via the UART interface. SparkFun GPS-13670
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The GPS receiver is equipped with a 56-channel GP-735T module based on the 7th generation uBlox chipset. It can work with a tracking sensitivity of -162dBm and only 29 seconds of cold start time. It has a built-in antenna and communicates via the UART interface. By default it works with a refresh rate of 1 Hz, which can be increased to 10 Hz. The module is supplied with the voltage from 3.3 V to 5.5 V through a 6-pin JST SH connector. Thanks to its small size, it can be used in small devices and mobile robots.
Features
- Built-in antenna
- V-BAT battery power pin (backup power supply)
- Support for UART-TTL interface
- Full implementation of the u-blox7 architecture
- High tracking sensitivity -162 dBm
- Low energy consumption of 37 mA
- Hardware pin to enable / disable GPS power via GPIO
- A-GPS support
- Dimensions: 35 x 8 x 6.5 mm
588716
You might also like
Shield with a 6-pin JST SH connector dedicated to Arduino Mini. It allows you to connect the GPS module with the GP-735 chip. SparkFun GPS-14030
zł37.82
24h
Available quantity: 1
Available
Adapter with 6-pin JST SH connector for holes with 2.54 mm pitch. Dedicated to GPS modules. SparkFun BOB-11818
zł30.79
24h
Available quantity: 1
Available
Female-female cable, 63 cm long, with JST-SH 6-pin plug on both sides. Suitable for micro DC motor encoders with gear. Pololu 4769
zł17.00
Delivery date unknown
No product available!
Female-female cable, 40 cm long, with JST-SH 6-pin plug on both sides. Suitable for micro DC motor encoders with gear. Pololu 4768
zł14.15
Delivery date unknown
No product available!
Female-female cable, 25 cm long, with JST-SH 6-pin plug on both sides. Suitable for micro DC motor encoders with gear. Pololu 4767
zł12.08
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
Function module designed for MicroMod boards. Equipped with GPS with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It communicates via UART, I2C and SPI interfaces. SparkFun GPS-18378
zł309.84
Delivery date unknown
No product available!
GNSS receiver module dedicated to Raspberry Pi minicomputers. It provides simultaneous reception of GPS and GLONASS satellite systems. Waveshare MAX-7Q GNSS HAT
zł135.57
6 weeks
No product available!
Available
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
zł2,086.85
4 weeks
No product available!
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports positioning assistance systems (WAAS, EGNOS, MSAS and GAGAN) and EASY technology. Waveshare LC29H(AA) GPS HAT
zł207.34
6 weeks
No product available!
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-17285
zł478.20
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł120.87
24h
Available quantity: 6
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
Kit with Facet L-Band GNSS RTK receiver and accessories. Get centimeter-level global positioning measurements with GNSS RTK. SparkFun GPS-20000
zł8,859.70
6 weeks
No product available!
Module with BDS/GNSS AT6558 receiver. It can receive data from six location systems simultaneously: GPS, GLONASS, Galileo, QZSS, SBAS and BeiDou. It communicates via the UART interface. DFRobot TEL0132
zł89.19
24h
Available quantity: 2
Available
Industrial 4G module with Qualcomm SIM7600E-H chip. It allows you to connect devices with USB or UART communication with 4G networks. Waveshare SIM7600E-H 4G DONGLE
zł257.19
24h
Available quantity: 3
Available
GNSS receiver to receive navigation signals from satellite navigation systems such as GPS and BeiDou. It offers positioning accuracy of up to 2 m. DFRobot TEL0157
zł103.28
24h
Available quantity: 2
Available
Advanced expansion board for Arduino. It has support for mini-SIM cards and NB-IoT cards. Thanks to the GNSS module (Global Navigation Satellite System), it supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. The module is powered by 7-12V voltage. DFRobot DFR0572
zł237.00
4 weeks
No product available!
Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Adafruit 2636
zł326.70
4 weeks
No product available!
GNSS receiver module with Multi-GNSS support for GPS, GLONASS, Galileo and QZSS. Has an internal LNA. Quectel L76-L
Regular pricezł44.98zł42.90
24h
Available quantity: 21
Available
The GPS receiver is equipped with a GP-735T module. It is supplied with the voltage from 3.3 to 5.5 V and communicates via the UART interface. SparkFun GPS-13670