MicroMod GNSS - MicroMod function module with NEO-M9N GPS receiver

Opis

Function module designed for MicroMod boards. It is equipped with a GPS with a 92-channel GNSS NEO-M9N receiver. The module has an M.2 connector and works with MicroMod Main Board (Single) and MicroMod Main Board (Double).

The NEO-M9N GNSS module can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. Determining the position with the help of the module allows you to achieve an accuracy of up to 1.5 m. The NEO-M9N module detects jamming and forgery events. Additionally, it has been equipped with a SAW (Surface Acoustic Wave) filter, which in combination with LNA (Low Noise Amplifier) enables normal operation even with strong signal interference. The module configuration is performed via the USB connector and the dedicated u-center application. The module is also available Arduino library with numerous examples of use. The sensors connect to the main module through the UART, I2C and SPI interface. There is a 3.3 V voltage stabilizer and a LED on the board. Full documentation with examples of use is available on the product page.

MicroMod is an interface ecosystem that connects the main module to the processor or the microcontroller to various peripherals through expansion boards. Using the M.2 standard, MicroMod allows easy replacement of main modules.

Features

• Integrated U.FL connector (antenna not included)
• 92-channel GNSS receiver
• Accuracy 1.5 m
• Maximum update rate 25 Hz
• Start-up time: 24s (cold start), 2s (hot start)
• Maximum altitude: 80,000 m
• Max G: ≤4
• Maximum speed: 500 m / s
• Speed accuracy: 0.05 m / s
• Course accuracy: 0.3 degrees
• Timing Pulse Accuracy: 30 ns
• External interrupt
• Pin check
• Low power consumption mode
• Supports NMEA, UBX and RTCM protocols via UART or I2C interfaces
• AP2112K regulator 3.3 V 600 mA
• Power LED and PPS (Pulse Per Second)
• Configuration jumpers
• M.2 connector
• USB Type-C connector