New products
New products New products
zł59.96
24h
Available
Available
TinySA Ultra - 100kHz - 5.3GHz network analyzer with 4" display
ID: 1186077
5906623467020
zł709.00
Tax included
zł576.42 tax excl.
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
Description
The network analyzer is an advanced tool in the field of electromagnetic signal analysis, offering comprehensive measurement capabilities in the frequency range from 100 kHz to 5.3 GHz. It is distinguished not only by its compact design, but also by a clear 4-inch display, on which information about the measured signal characteristics and analysis results are available. Valuable data can be easily read thanks to the color presentation, and up to 450 scanning points on the spectrum graph provide detailed information about the processes taking place.
The analyzer is equipped with two inputs: an input with a range of 0.1 MHz to 800 MHz and an input in Ultra mode covering the band up to 5.3 GHz. The built-in signal generator is an additional function of the analyzer. With two outputs, it generates a sine wave for the range from 0.1 MHz to 800 MHz and a square wave for the range up to 5.3 MHz. The analyzer has bandpass filters with switched resolution, allowing for precise selection of the analysis band. This resolution can be adjusted from 200 Hz to 850 kHz, allowing the examination of both detailed and broadband signals.
In order to ensure the accuracy of measurements, the analyzer is equipped with an input step attenuator, the level of which can be adjusted from 0 dB to 31 dB. Please note that the attenuator cannot be used in conjunction with an LNA (Low Noise Amplifier) to avoid interference. For calibration and self-tests, a built-in calibration signal generator is used to ensure the accuracy and consistency of measurement results. The ability to connect the analyzer to a computer via a USB port enables data transfer and archiving, which supports the analysis and reporting of results. The device has a built-in battery, so it can be used as a portable network analyzer and work for at least 2 hours without access to a power source.
Features
- Display: 4"
- Spectrum analyzer with two inputs
- High quality input for 0.1MHz to 800MHz, Ultra mode input up to 5.3GHz, Observable up to 12GHz
- Signal generator with two outputs, a sine wave output for 0.1 MHz to 800 MHz and a square wave output for 5.3 GHz
- Switchable resolution bandpass filters for both ranges from 200Hz to 850kHz
- Built-in optional 20dB LNA
- Color display showing up to 450 scan points
- microSD card slot
- Input step attenuator from 0dB to 31dB (cannot be used in conjunction with LNA)
- Built-in calibration signal generator for automatic self-test and calibration
- Can be connected to a computer via USB
- Rechargeable battery for at least 2 hours of operation
- Maximum input level +10dBm
Kit contains
- TinySA Ultra
- 2 x SMA M-M cable
- Calibration kit
- SMA F-F Adapter
- USB cable
1186077
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Spectrum analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA
zł298.07
Delivery date unknown
No product available!
Other products in the same category (16)
A portable, high-precision frequency counter designed for advanced RF, time, and phase measurements. It offers 40 ps time resolution, gapless measurement intervals, and an input bandwidth of up to 12 GHz via an SMA A input. A built-in GNSS-disciplined oscillator ensures synchronization with UTC time and high long-term stability. The device features a 4-inch touchscreen, battery power, and a USB and microSD card interface for storage and remote operation. TinyGTC ZC412
zł878.99
Delivery date unknown
No product available!
Advanced spectrum analyzer with a working range from 100 kHz to 5.4 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS406
zł709.41
24h
Available quantity: 8
Available
Compact vector analyzer, enabling measurements in a wide frequency range from 50 kHz to 6.3 GHz, ideal for analyzing antennas and RF systems in the HF, VHF, UHF and WiFi bands. With a 3.95" touch screen, USB-C interface and support for VNA-QT software, it offers convenient operation and professional analysis of results both in the field and in the laboratory. liteVNA 64
zł861.97
24h
Available quantity: 3
Available
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports standard 50 Ω impedance and features IEC 60169-16 compliant N-type female connectors. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06NFE
zł1,799.00
24h
Available quantity: 1
Available
Compact antenna analyzer with a working range from 50 kHz to 1.5 GHz, ideal for HF, VHF and UHF antenna measurements and RF component analysis. Equipped with a 2.8" touchscreen, calibration kit and USB-C interface, it offers simple operation, mobility and the ability to work with a computer or smartphone. NanoVNA-H
zł297.76
6 weeks
No product available!
Vector network analyzer with two ports. It can perform measurements at frequencies from 50 kHz to 3 GHz. Equipped with an IPS LCD display, it can be connected to a computer via a USB connector. Seeed Studio 113991034
zł1,199.00
4 weeks
No product available!
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports a standard 50 Ω impedance and features 3.5 mm female connectors compliant with IEC 60169-23. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06SFE
zł1,799.00
24h
Available quantity: 1
Available
Advanced spectrum analyzer with a working range from 100 kHz to 8 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS407
zł905.19
24h
Available quantity: 1
Available
Compact vector analyzer, enabling measurements in a wide frequency range from 50 kHz to 6.3 GHz, ideal for analyzing antennas and RF systems in the HF, VHF, UHF and WiFi bands. With a 2.8" touch screen, USB-C interface and support for VNA-QT software, it offers convenient operation and professional analysis of results both in the field and in the laboratory. liteVNA 62
zł661.06
6 weeks
No product available!
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports a standard 50 Ω impedance and features IEC 60169-16 compliant N-type male connectors. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06NME
zł1,799.00
24h
Available quantity: 1
Available
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports a standard 50 Ω impedance and features 3.5 mm male connectors compliant with IEC 60169-23. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06SME
zł1,799.00
24h
Available quantity: 1
Available
Portable frequency and phase analyzer based on NanoVNA-H4, designed for precise comparison of signals in the range from 1 MHz to 300 MHz, ideal for testing 10 MHz clocks, among others. With a touch screen, data logging and a built-in 2000 mAh battery, it is a mobile tool for engineers and electronics enthusiasts who require high measurement accuracy. tinyPFA
zł349.00
24h
Available quantity: 5
Available
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano V2 2.8"
zł431.10
6 weeks
No product available!
Portable antenna analyzer with a working range from 50 kHz to 3 GHz, ideal for testing 50 Ohm installations and analyzing filters and S-parameters. Equipped with a 4-inch touchscreen, 3000 mAh battery and support for Windows, Linux and macOS, it offers high precision and portability for hobbyists and professionals. NanoVNA SAA2N
zł440.45
24h
Available quantity: 3
Available
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
zł848.15
24h
Available quantity: 1
Available
A portable, high-precision frequency counter designed for advanced RF, time, and phase measurements. It offers 40 ps time resolution, gapless measurement intervals, and an input bandwidth of up to 7 GHz via an SMA A input. A built-in GNSS-disciplined oscillator ensures synchronization with UTC time and high long-term stability. The device features a 4-inch touchscreen, battery power, and a USB and microSD card interface for storage and remote operation. TinyGTC ZC407
zł789.00
24h
Available quantity: 2
Available
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra