New products
New products New products
zł59.96
24h
Available
Available
tinySA Ultra+ ZS406 - 100kHz - 5.4GHz spectrum analyzer with 4" display
ID: 1197005
5902186301924
zł709.41
Tax included
zł576.76 tax excl.
Advanced spectrum analyzer with a working range from 100 kHz to 5.4 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS406
Description
tinySA Ultra+ is an advanced spectrum analyzer operating in the range of 100 kHz to 5.4 GHz. The ZS-406 model is one of the latest versions in the tinySA Ultra+ line and offers several improvements over previous models. The device features a 4-inch color resistive touchscreen and provides 450 scan points across the entire frequency band. With a built-in 5000 mAh battery, it delivers up to 3 hours of mobile operation. In addition to spectrum analysis, the device can function as a sine or square wave signal generator. Features such as band-pass filtering, automatic calibration, and input attenuator make it a comprehensive diagnostic tool for RF enthusiasts and professionals alike. The analyzer can be fully controlled from a PC via USB and supports AM, FM (narrow/wide) modulation, reference frequency output, and various RBW settings. It also supports automatic self-test and calibration using the built-in generator.
Ultra mode is disabled by default but can be easily enabled via CONFIG/MORE/ENABLE ULTRA command using unlock code 4321. Once enabled, ultra mode will remain enabled until disabled or FW updated.
Features
- Frequency range (analyzer): 100 kHz to 900 MHz (normal mode), 100 kHz – 5.4 GHz (ultra mode)
- Frequency range (generator): Sine: 100 kHz to 900 MHz, Square: up to 4.4 GHz
- Frequency resolution (generator): 44 Hz below 900 MHz
- Reference output: 1, 2, 4, 10, 15, or 30 MHz (square wave, -35.6 dBm)
- Display: 4" color resistive touchscreen
- Number of scan points: 450
- RBW bandwidth: 0.2 / 1 / 3 / 10 / 30 / 100 / 300 / 600 / 850 kHz or automatic
- Input impedance: 50 Ω (with attenuation >10 dB)
- Max input level: +6 dBm (at 0 dB attenuation)
- 1 dB compression point: -1 dBm (at 0 dB attenuation)
- Dynamic range (no interference, RBW 30 kHz): 70 dB
- Power measurement accuracy: ±2 dB (after calibration)
- Phase noise: -92 dBc/Hz (10 kHz offset), -108 dBc/Hz (100 kHz offset)
- Generator harmonics: < -40 dB from fundamental tone (100 kHz – 900 MHz)
- Signal modulations: AM, narrow FM, wide FM
- USB: Type C, full PC control
- Power supply: 5V via USB (max 1.3A)
- Battery: 5000 mAh (up to 3 hours of operation)
- ESD protection
- Dimensions: 117 x 72 x 23 mm
Kit contains
- tinySA Ultra+ spectrum analyzer (ZS-406)
- 2 × SMA cables
- SMA connector
- SMA antenna
- USB-C charging cable
- 32 GB microSD card
1197005
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
zł709.00
24h
Available quantity: 2
Available
Spectrum analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA
zł298.07
Delivery date unknown
No product available!
Advanced spectrum analyzer with a working range from 100 kHz to 8 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS407
zł905.19
24h
Available quantity: 2
Available
Other products in the same category (16)
Advanced spectrum analyzer with a working range from 100 kHz to 8 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS407
zł905.19
24h
Available quantity: 2
Available
4-port electronic calibration module designed to work with vector network analyzers such as LibreVNA, in the frequency range from 9 kHz to 6 GHz. It enables automatic and precise calibration, replacing traditional sets (Open, Short, Load 50Ω), which simplifies measurements and minimizes errors resulting from manual operation. LibreCAL
zł819.00
24h
Available quantity: 1
Available
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports a standard 50 Ω impedance and features 3.5 mm male connectors compliant with IEC 60169-23. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06SME
zł1,799.00
24h
Available quantity: 1
Available
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports a standard 50 Ω impedance and features IEC 60169-16 compliant N-type male connectors. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06NME
zł1,799.00
24h
Available quantity: 1
Available
Compact antenna analyzer with a working range from 50 kHz to 1.5 GHz, ideal for HF, VHF and UHF antenna measurements and RF component analysis. Equipped with a 2.8" touchscreen, calibration kit and USB-C interface, it offers simple operation, mobility and the ability to work with a computer or smartphone. NanoVNA-H
zł297.76
6 weeks
No product available!
Spectrum analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA
zł298.07
6 weeks
No product available!
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
zł709.00
24h
Available quantity: 2
Available
A portable, high-precision frequency counter designed for advanced RF, time, and phase measurements. It offers 40 ps time resolution, gapless measurement intervals, and an input bandwidth of up to 7 GHz via an SMA A input. A built-in GNSS-disciplined oscillator ensures synchronization with UTC time and high long-term stability. The device features a 4-inch touchscreen, battery power, and a USB and microSD card interface for storage and remote operation. TinyGTC ZC407
zł789.00
24h
Available quantity: 2
Available
A portable, high-precision frequency counter designed for advanced RF, time, and phase measurements. It offers 40 ps time resolution, gapless measurement intervals, and an input bandwidth of up to 12 GHz via an SMA A input. A built-in GNSS-disciplined oscillator ensures synchronization with UTC time and high long-term stability. The device features a 4-inch touchscreen, battery power, and a USB and microSD card interface for storage and remote operation. TinyGTC ZC412
zł878.99
24h
Available quantity: 1
Available
This calibration kit for vector network analyzers provides precise calibration up to 6 GHz. It supports a standard 50 Ω impedance and features 3.5 mm female connectors compliant with IEC 60169-23. Open, Short, Load, and Thru elements ensure low loss, good phase accuracy, and high measurement repeatability. ZeenKo ZKVC06SFE
zł1,799.00
24h
Available quantity: 1
Available
Vector network analyzer with two ports. It can perform measurements at frequencies from 50 kHz to 3 GHz. Equipped with an IPS LCD display, it can be connected to a computer via a USB connector. Seeed Studio 113991034
zł1,199.00
4 weeks
No product available!
2-port vector network analyzer operating from 100 kHz to 6 GHz, enabling fast and precise S-parameter measurement thanks to the use of FPGA and three 16-bit ADCs. It offers up to 100 dB dynamic range (up to 3 GHz), Windows/Linux/macOS support, and spectrum analyzer and signal generator functions, making it a versatile tool for laboratory and field applications. LibreVNA
zł2,835.00
6 weeks
No product available!
Portable antenna analyzer with a working range from 50 kHz to 3 GHz, ideal for testing 50 Ohm installations and analyzing filters and S-parameters. Equipped with a 4-inch touchscreen, 3000 mAh battery and support for Windows, Linux and macOS, it offers high precision and portability for hobbyists and professionals. NanoVNA SAA2N
zł440.45
24h
Available quantity: 3
Available
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano V2 2.8"
zł431.10
6 weeks
No product available!
Compact vector analyzer, enabling measurements in a wide frequency range from 50 kHz to 6.3 GHz, ideal for analyzing antennas and RF systems in the HF, VHF, UHF and WiFi bands. With a 2.8" touch screen, USB-C interface and support for VNA-QT software, it offers convenient operation and professional analysis of results both in the field and in the laboratory. liteVNA 62
zł661.06
6 weeks
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 900 MHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano VNA
zł319.78
24h
Available quantity: 2
Available
Advanced spectrum analyzer with a working range from 100 kHz to 5.4 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS406