ArduCam B0185 IMX219 8MPx - module with minicamera for Nvidia Jetson Nano
ID: 576981
5906623403158
zł139.96
Tax included
zł113.79 tax excl.
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
Description
Module with a miniature camera with IMX219 matrix with 8 MPx resolution, designed for use with the NVIDIA Jetson Nano minicomputer and NVIDIA Jetson modules. Thanks to the long tape (up to 300 mm long), the module is ideal for tight housings in which the camera needs to be led outside.
Warning!
The NVIDIA Jetson Nano minicomputer shown in the pictures is not included, please buy it separately.
The NVIDIA Jetson Nano minicomputer shown in the pictures is not included, please buy it separately.
Features
- Matrix: Sony IMX219
- Resolution: 8 MPx
- Matrix format: ¼ inch
- Viewing angle: 62,2 °
- Equivalent focal length: 3.04 mm
- Focal length ratio; 2.0
- Focus type: Fixed focus
- Infrared filter
- Band length: 300 mm
- Cable width: 9 mm
- Cable thickness: 0.1 mm
576981
Data sheet
- Resolution
- 8MPx
- Interface
- CSI
- Sensor
- Sony IMX219
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with Tegra X2 SoC system containing four 64-bit ARM Cortex A57 cores and a Pascal graphics system consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX2 900-83310-0001-000.
zł3,910.99
Delivery date unknown
No product available!
Module with SoC chip containing four 64-bit ARM Cortex A57 cores and a PascalTM graphics system consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX2 4GB
zł2,103.40
Delivery date unknown
No product available!
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł975.01
Delivery date unknown
No product available!
Other products in the same category (16)
Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with MIPI CSI-2, Mini-PCIe / mSATA extension, HDMI Video, USB 3.0 and 2.0 as well as two serial ports for RS-232/485. Connect Tech ASG002
zł4,041.89
2 weeks
No product available!
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
zł139.96
24h
Available quantity: 2
Available
Starter Cable Kit for Elroy Carrier. Connect Tech CKG059
zł656.02
24h
Available quantity: 2
Available
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
zł1,692.68
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
zł2,190.84
2 weeks
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
zł2,347.98
2 weeks
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
zł2,471.64
2 weeks
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
zł7,986.13
2 weeks
No product available!
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
zł1,012.65
2 weeks
No product available!
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
zł790.08
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
zł982.97
2 weeks
No product available!
Starter Cable Kit for Astro Breakout Board. Connect Tech CKG041
zł1,198.11
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
zł4,012.21
2 weeks
No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
zł495.91
24h
Available quantity: 3
Available
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
zł22.96
24h
Available quantity: 10
Available
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Regular pricezł17.70zł11.89
24h
Available quantity: 304
Available
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185