- Out-of-Stock
eMMC Module C0/C1+ Android Black for ODROID-C0, ODROID-C1 and ODROID-C1+
Pre-installed Ubuntu 14.04 or latest version
eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.
Note! ODROID-C1 / C1+ / C0 host supports eMMC version 4.5
The eMMC chipset is only compatible with Amlogic S905 and S805 series (ODROID-C1+ / C0 / C2)
This eMMC chipset is NOT compatible with ODROID-XU4 / XU3 / U3 / U2 / X series
eMMC Module Reader is included

Adapter micro-SD for eMMC

eMMC attached to adapter
Storage I/O comparison
To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:
$ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024
$ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024

If you use the eMMC storage, you can get about two to three times faster storage I/O read performance. However, an affordable microSD UHS-1 card can still achieve reasonably fast speeds thanks to the advanced SD 3.01 host controller in the S805 processor. The MicroSD card read performance on C1+ is still about 1.7 times faster then RPi if you use the UHS-1 memory card.
Manufacturer
Responsible person
PCB and pre-programmed system for LED controller controlled by any remote control. AVT3133 A +
No product available!
AVT kit for self-assembly of LED driver controlled by any remote control. AVT3133 B
No product available!
Assembled LED lighting controller controlled by any remote control. AVT3133 C
No product available!
PCB and programmed layout for a 3-axis CNC generator. AVT5422 A +
No product available!
AVT kit for self-assembly of a 3-axis CNC generator. AVT5422 B
No product available!
No product available!
USB cable with a length of 100cm, used for data transmission and charging devices with a microUSB connector. A meter is built into the cable plug, allowing the user to estimate the current consumption of the connected device and read the value of the supply voltage
No product available!
Orange Pi Lite with Quad Core 1.2GHz 512MB DDR3 WiFi Mini PC
No product available!
Orange Pi Plus 2e is a computer with SoC Alwinner H3 (4 cores, Cortex-A7, Mali400MP2 GPU), has 2 GB of RAM, 16GB of integrated eMMC memory and WiFi 802.11 b / g / n module. There are three USB 2.0 ports, one ethernet port (1 Gigabit), a 40-pin GPIO connector and a micro-SD card slot
No product available!
No product available!
High quality acrylic computer case for Orange Pi One, transparent
No product available!
Acrylic computer case for Orange Pi Plus 2. Helps to protect the computer against the dust and mechanical damage. The assembly does not require a glue. Allows easy access to all the computer sockets.
No product available!
The housing for Orange Pi Plus is transparent, with snaps. The installation does not require the use of glue. The housing is made of high quality plastic. All openings made in the housing allow easy access to every socket built in Orange Pi Plus
No product available!
Acrylic computer case for Orange Pi PC / PC Plus / PC 2, transparent
No product available!
PCB and programmed layout for the gigatermometer. AVT3155 A +
No product available!
AVT kit for self-assembly gigatermometer. AVT3155 B
No product available!
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode