- Out-of-Stock
Development kit based on the Arm Cortex-M4 32-bit microcontroller with a frequency of 180 MHz. The module has a built-in 2MB Flash memory, 256 KB SRAM, SDRAM controller, HS USB and Ethernet MAC. The tile contains numerous peripheral systems, including LED diodes, user buttons, accelerometer or microSD card connector.
The tile is compatible with the Freescale Tower system. The modular design of the system makes it easy to use, reliable, well integrated and provides toolchain with a compiler, debugger and analyzer.

Manufacturer
Responsible person
Module with a 4.3-inch LCD display for use with Freescale development kits. It is part of the Freescale Tower system. LCD TWR-LCD-RGB
Development kit based on Vybrid® VF61NS151CMK50 processor equipped with two cores: Cortex-A5 with frequency 500 MHz and Cortex-M4 with frequency 167 MHz. The module has a built-in memory DDR3 128 MB and Flash 256 MB. TWR-VF65GS10
Tower system 802.11n Wi-Fi® module, Freescale Semiconductor, RoHS
Cable with USB plugs type A and micro-USB (type B), cable length 1.8 m
Lithium Polymer rechargeable cell with a Protection circuit. Compatible with ODROID-C0
No product available!
MYIR MYC-JA5D44 is a single-board computer in the form of a card with SO-DIMM 200-pin connector. The SAMA5D44 processor from Atmel, based on Cortex-A5 cores, has been equipped. It can work with a maximum frequency of 600 MHz. It has 512 MB of DDR2 SDRAM, 512 MB of NAND Flash memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector.
No product available!
MYIR MYC-C7Z020 is a single board computer module based on the MYC-C7Z020 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
No product available!
This is the Green Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Blue, Red, White, and Yellow! Adafruit 3107
No product available!
No product available!
The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get. A000133
No product available!
Printed circuit board with programmed layout for a dual-function acoustic switch. AVT3144 A +
No product available!
Programmed layout for a dual-function acoustic switch. AVT3144 UK
No product available!
A set for self-assembly of a dual-function sound switch. AVT3144 B
No product available!
Ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system; built-in 4.7KΩ pullup resistors for I2C communications. SEN-13763
No product available!
Printed circuit board and programmed clock system with a 20mm display set by means of GPS. AVT5522 / 1 A +
No product available!
AVT kit for self-assembly of an accurate clock with a 20mm display set by means of GPS. AVT5522 / 1 B
No product available!
Assembled, accurate clock with 20mm display set by means of GPS. AVT5522 / 1 C
No product available!
Printed circuit board and programmed clock system with a 55mm display set by means of GPS. AVT5522 / 2 A +
No product available!
AVT set for self-assembly of the clock with a 55mm display set by means of GPS. AVT552 / 2 B
No product available!
Assembled clock with 55mm display set by means of GPS. AVT5522 / 2 C
No product available!
Development kit based on the Arm Cortex-M4 32-bit microcontroller with a frequency of 180 MHz. The module has a built-in 2MB Flash memory, 256 KB SRAM, SDRAM controller, HS USB and Ethernet MAC. TWR-K65F180M