- Out-of-Stock
NVIDIA Jetson TX1 module
ID: 562523
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1
Description
NVIDIA Jetson TX1 is a Tegra X1 SoC chip module containing four 64-bit ARM Cortex A57 cores and a Maxwell graphics chip consisting of 256 cores supporting CUDA technology. The system is supported by 4 GB DDR4 RAM memory, 16 GB eMMC memory, Wi-Fi and Bluetooth connectivity as well as communication protocols such as UART, SPI, I2C or I2S. The module is designed especially for graphic design and processing of very large amounts of data. It also allows you to familiarize yourself with the programming technique of GPUs.
The NVIDIA Jetson TX1 module is also available as a set with a base plate and additional components as a development kit .
properties
- CPU: Quad-core ARM @ A57 processor (1.9 GHz)
- Graphics (GPU): NVIDIA Maxwell ™, 256 CUDA cores
- RAM memory: 4 GB, 64-bit LPDDR4
- Display: 2 x DSI 1 x eDP 1,4 / DP 1,2 / HDMI
- PCIE Gen 2 | 1x4 + 1x1
- CSI interface up to 6 cameras (2 lines) CSI2 D-PHY 1.1 (1.5 Gbps / line)
- Mass storage: 16 GB eMMC, SDIO, SATA
- USB 3.0 and USB 2.0
- Interfaces: UART, SPI, I2C, I2S, GPIO
- Connectivity Wi-Fi 802.11ac and Bluetooth 4.1 / BLE
- 1 Gigabit Ethernet network support
- Power supply: 5.5 ... 19.6 V DC
- Power: 6.5 ... 15 W
- Module dimensions: 50 x 87 mm
562523
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Kit with NVIDIA Denver 2 CPU and ARM Cortex-A57 and NVIDIA Pascal graphics. It has 4 GB DDR4 RAM, 16 GB eMMC memory and 128 GB NVME SSD disk. Waveshare JETSON-TX2-NX-DEV-KIT-EU
zł1,797.72
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł1,999.06
24h
Available quantity: 23
Available
Other products in the same category (16)
NanoPI NEO is a single-board chip from FriendlyELEC with a RAM of 256 MB, successfully competing with the systems created by the giant in this field Raspberry Pi. It is 25% smaller and cheaper than the Raspberry Pi Zero board with similar capabilities
Retired
No product available!
HAT for powering over Ethernet (PoE) for Raspberry Pi. It allows you to use the PoE interface to power the minicomputer via an Ethernet cable
Retired
No product available!
HAT for powering over Ethernet (PoE) for Raspberry Pi. It allows you to use the PoE interface to power the minicomputer via an Ethernet cable
Retired
No product available!
The SparkFun Qwiic Shield for Arduino Nano allows you to add the SparkFun Qwiic ecosystem to development boards that use the Arduino Nano Footprint in an easy-to-assemble shield. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Arduino Nano to four SparkFun Qwiic connectors.
Retired
No product available!
The SparkFun Qwiic Shield for Thing Plus provides an easy-to-assemble way to add the SparkFun Qwiic ecosystem to any development board with the Thing Plus Footprint. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Thing Plus to four SparkFun Qwiic connectors. Sparkfun DEV-16138
Retired
No product available!
Cytron 0.8Amp 5V-26V DC Motor Driver Shield - DC motor driver for Arduino
Retired
No product available!
No product available!
No product available!
No product available!
Cytron USB to UART Converter CH340 - USB - UART converter based on the CH340 chip
Retired
No product available!
Logic level converter (4 channels)
Retired
No product available!
The Blebox Wifi controller is dedicated to the most modern digital tapes with 5 V and 12 V, but a LED strip with WS2812 / WS2811 driver is required. BleBox pixelBox
Retired
No product available!
Evaluation kit with RISC-V Dual Core 64bit chip clocked at 400MHz. Equipped with a USB-UART converter, camera, display and Micro SD card connectors. Designed for AI applications in IoT. Seeed Studio 102991150
Retired
No product available!
Evaluation kit with RISC-V Dual Core 64bit chip clocked at 400MHz. Equipped with a USB-UART converter, OV2640 camera, LCD display. The set is enclosed in a housing. Designed for AI applications in IoT. Seeed Studio 110991191
Retired
No product available!
MEMS MSM261S4030H0 microphone module designed to work with Sipeed MAix kits. The module is characterized by high sensitivity, low noise and low cost. Seeed Studio 107990153
Retired
No product available!
Module with RISC-V Dual Core 64bit chip for AI applications with a wide selection of peripheral systems. It enables the implementation of advanced projects using image recognition, sounds and deep learning. Version without WiFi. Seeed Studio 114991695
Retired
No product available!
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1