- Out-of-Stock
ELECTRONIC FUSE - A SELF-ASSEMBLY KIT
As you know, traditional fuses are too slow to effectively protect modern devices. Their role has been taken over by electronic fuses, in which the voltage drop on the measuring resistor of a small value is usually checked. In the presented system, there is no such measurement resistor. The measurement was carried out in an unusual way. A control transistor was used for this. During normal operation, MOSFET is fully open and presents a small resistance. It is she who performs the role of a measuring resistor - a sensor with too much current.
The device is especially recommended as necessary equipment of laboratory power supplies, for powering tested devices
Selected parameters:
Download
Manufacturer
Responsible person
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3400 mAh. Panasonic NCR-18650B
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 2600 mAh. Sony/Murata US18650VTC5
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 2600 mAh. Sony/Murata US18650VTC5A
No product available!
Minicomputer with Allwinner H616 Cortex-A53 quad-core processor. It is equipped with a Mali G31 MP2 GPU and 1 GB of RAM. The set provides WiFi communication and Bluetooth 5.0. Orange Pi Zero2
No product available!
Minicomputer with 4-core Allwinner V40 ARM Cortex-A7 processor, Mali 400 MP2 GPU graphics card, 1 GB RAM, WiFi, BT 4.0 and numerous connectors. Banana Pi BPI-M2 Berry
No product available!
The kit is designed to work with Linux. It consists of the SoM (System on Module) Quark-N and the Atom-N expansion board. Seeed Studio 114992462
No product available!
Development board equipped with an ESP32 module and a 3.5-inch color touch screen. Seeed Studio 102991454
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera, microphones, LCD display and microSD card slot. Everything is closed in a housing. Seeed Studio 102110425
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with 2 cameras, microphone, LCD display and microSD card slot. Everything is closed in a housing. Seeed Studio 102110463
No product available!
Development board based on GD32VF103CBT6 MCU with 32-bit RISC-V core. It is equipped with an IPS RGB LCD display with a diagonal of 0.96 inch 160x80 and a housing. Seeed Studio 102991302
No product available!
AI module with RISC-V Kendryte K210 chip, which can work with micro: bit, Arduino and Raspberry Pi. Equipped with a camera, microphone, speaker, IPS screen and Wi-Fi communication. Seeed Studio 101990646
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera and USB Type-C to M.2 adapter. Seeed Studio 102991335
No product available!
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
No product available!
A set for building a remotely controlled vehicle based on the micro:bit educational module. Seeed Studio 114991884
No product available!
The expansion module with 3 Grove connectors for the micro:bit educational module. Seeed Studio 114991850
No product available!
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-06
No product available!
ELECTRONIC FUSE - A SELF-ASSEMBLY KIT