Banana Pi BPI-M2 Berry - minicomputer with Allwinner V40 processor, WiFi, BT 4.0 and 1GB RAM

Description

Banana Pi BPI-M2 Berry is a minicomputer with a quad-core Allwinner V40 ARM Cortex-A7 processor and a MALI 400 MP2 GPU graphics card. It is equipped with 1 GB of RAM and a microSD card slot and SATA connector. BPI-M2 Berry has numerous connectors: Ethernet, USB type A, HDMI, 3.5 mm audio jack and a CSI camera connector, MIPI DSI display and a 40-pin connector with interfaces such as UART, I2C, SPI or PWM outputs. The minicomputer is also equipped with the chip, which provides WiFi wireless communication and Bluetooth 4.0.

The minicomputer is powered by a microUSB connector (recommended 5V/2A power supply). It can work under the control of Android or Linux. The manufacturer offers extensive support for users in the form of quick start instructions and Wiki documentation.

Features

• Soc Allwinner V40, Cortex-A7 Quad Core CPU
• MALI-400 MP2 dual-core GPU, operating at 500 MHz, with 1.1 Gpixel/s bandwidth, provides OpenGL ES 2.0, OpenVG with hardware acceleration, high-profile 1080p45 H.264 encoding and decoding
• 1 GB DDR3 733 MHz SDRAM shared with GPU
• SATA interface
• 40-pin GPIO connector: 28 × GPIO, including UART, I2C, SPI, PWM, I2S
• Ethernet 10/100/1000 Mb/s (Realtek RTL8211E/D)
• Wi-Fi WiFi 802.11 b/g/n module (AP 6212 module)
• Bluetooth BT4.0
• MicroSD memory card slot
• 4-lane display MIPI DSI, RGB or LVDS, TV output to HDMI V1.4
• Video decoding in many FHD formats including Mpeg1 / 2, Mpeg4, H.263, H.264 etc. H.264 decoding to 1080P60
• HDMI audio outputs, analog audio via 3.5mm TRRS jack
• CSI camera input connector: Supports YUV422 8-bit CMOS sensor interface, CCIR656 protocol for NTSC and PAL, 5MPx camera sensor
• Built-in microphone
• USB host
• 4 x USB 2.0
• USB 2.0 OTG
• Reset button, Power button, U-boot
• Power and RJ45 LEDs
• DC 5V/2A power supply via micro USB
• Dimensions: 85 x 56 mm
• Weight: 40 g