- Out-of-Stock
ACCOUNTING WITHOUT A PROFILE FACTOR - PRINTED PLATE
Often, a power supply with low current efficiency is needed to power electronic devices. The use of a traditional solution for this purpose, ie a network transformer, means a significant increase in the overall dimensions of the device and component costs, with a large supply of unused energy. In this case, a much better solution is to use a transformerless power supply. The presented system has few elements and it is easy to change the output voltage in it. A small, longitudinal plate can easily be integrated into the casing of the entire powered device.
The device is particularly recommended for powering devices with low power consumption, where the smallest dimensions of the power supply are important
Selected parameters:
Download
Manufacturer
Responsible person
Mains power supply 5V, 3A, cable with micro-USB plug. It can be used as a power supply or charger of any device equipped with micro-USB sockets
No product available!
At the Feather 32u4\'s heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic. 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard and USB MIDI device. Adafruit 3027
No product available!
32-bit microcontroller with ARM Cortex-M0 core + Access line ultra-low-power, 14 pins, 16kB Flash, 2kB RAM, 512B EEPROM, ADC, TSSOP14, temperature range -40 to 85 ° C, STMicroelectronics, RoHS
No product available!
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
Pre-installed Android5.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
Pre-installed Android5.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
A module with a color and gesture sensor based on the APDS-9960 chip. It can detect simple hand gestures, RGB colors and measure ambient light. DFRobot SEN0187
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
No product available!
No product available!
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
No product available!
ACCOUNTING WITHOUT A PROFILE FACTOR - PRINTED PLATE