ODROID-HC4-P KIT - case with Odroid HC4 minicomputer (Amlogic S905X3 Quad-Core 2.0GHz processor + 4GB RAM)

Description

Self-assembly enclosure with Odroid HC4 minicomputer. It is made of laminate. It is equipped with a fan for proper cooling and space for mounting two SATA 3.5" drives. In addition, space is provided for an OLED display.

ODROID HC4 is an energy-saving and fast single-board computer with a Cortex-A55 quad-core processor and a new generation Mali-G31 graphics processor with support for OpenGL ES 3.2, Vulkan 1.0 and OpenCL 2.0. The set is equipped with 4 GB of RAM memory, a connector for microSD cards and two SATA connectors.

The minicomputer has numerous interfaces that allow you to connect external devices, incl. Ethernet, HDMI, USB 2.0 or IR receiver.

On the HC4 model, the manufacturer has dispensed with the USB 3.0 interface and instead users have access to two native SATA ports. The computer can support SSD and HDD drives in both 3.5" and 2.5" formats. The Odroid HC4 measures 84 x 90.5 mm and is enclosed in a transparent case. The device supports the operating systems Ubuntu 20.04, CoreELEC, Android 9. A large heatsink is mounted on the computer, which clearly improves heat dissipation from the processor. The manufacturer provides extensive documentation for the kit in the form of a Wiki page.

Features

• CPU:
  • Amlogic S905X3 12nm processor
  • L1 instruction cache: 32 KB
  • L1 data cache: 32 KB
  • L3 data cache: 512 KB
  • Quad-core Cortex-A55 (2.016 GHz)
  • ARMv8-A architecture with Neon and Crypto extensions
  • Mali-G31 MP2 graphics processor with 4 execution engines (650 MHz)
• Memory:
  • 4 GB DDR4 with 32-bit bus
  • Data transfer rate: 2640 MT / s (PC4-21333 class)
  • 1.2 V low power
  • MicroSD slot
• Network:
  • GbE LAN port (RJ45, supports 10/100/1000 Mb / s)
  • Realtek RTL8211F (Ethernet transceiver)
  • LED:
    • Green LED: Flashes when data traffic is 100 Mbps
    • Amber LED: Flashes on data traffic with a 1000Mbps connection
• Video:
  • HDMI 2.0 (up to 4K @ 60Hz with HDR, CEC, EDID)
• Audio:
  • HDMI digital output
• Cooler:
  • Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board
  • Hydraulic Bearing FAN
    • Rated Voltage : 5V
    • Rated Current : 100mA
    • Max Speed RPM : 4,000
    • Air Flow CFM : 4.3
    • Air Pressure (In H2O) : 0.053
    • Noise Level(dBA) : 23.9
    • Dimension : 40 x 40 x 10.6 mm
    • Wire & Connector : 80mm, 4 pin 1.25mm pitch
• External I/O ports:
  • USB 2.0 port
  • UART (debugging)
  • 2 x SATA port
• Other functions:
  • IR receiver
  • LED:
    • Red (PWR) - Steady light when connected to power
    • Blue (ALIVE) - Flashes while the Kernel is operating
• Power:
  • DC 5.5 x 2.1 mm jack
  • DC input: 14.5V to 15.5V (DC 15V / 4A power adapter recommended)
  • Energy consumption:
    • IDLE with HDD: 5.88 W
    • Active mode: 15.59 W
    • Standby mode: 0.29W
• Board dimensions: 84 mm x 90.5 mm x 25 mm
• Heatsink dimensions: 40 mm x 32 mm x 10 mm
• Weight: 280 g

• Housing made of dark plastic
• Possibility to install 2 SATA 3.5" drives
• Convenient access to power and reset switches
• Optional LED power button or display can be installed

Kit contains

• Odroid HC4 with 4GB RAM
• Cooling fan panel
• Side panel
• Top panel
• Side panel
• Back panel
• Front panel
• Cooling fan
• Stainless steel cooling fan grill
• Set of screws and spacers
• Cable kit