- -zł9.07
![Main view Main view](https://kamami.pl/75194-large_default/dso-tc3-portable-oscilloscope-with-lcr-tester-and-dds-generator-p6100-probe.jpg)
zł171.88 tax excl.
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The Fnirsi DSO-TC3 is a 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. The oscilloscope function allows measurement of analogue signals with a bandwidth of up to 500 kHz. It has one channel. With a sampling rate of 10 MS/s, the oscilloscope allows real-time detection of signal changes. The instrument can measure the frequency, period and duty cycle of a signal. Also worth noting is the trigger mode, which can operate in auto, normal or single measurement mode. This allows for more precise measurement of signals.
The LCR tester allows the measurement of capacitance, resistance and inductance of electronic components. The tester supports the measurement of capacitance, resistance and inductance. In addition, it has a digital signal generator, including sinusoidal, rectangular, triangular, pulse and DC signals.
The device is equipped with a 2.4" LCD TFT display, which allows for convenient reading of measurement results and easy control of the device. It is powered by a 1500 mAh rechargeable battery. The device can be recharged by means of a USB type C connector. The oscilloscope with LCR tester is used in electronics work, especially in the repair and diagnosis of electronic devices and in their design. It is a useful tool for those who need a handy multifunctional device for measuring and testing electronic components.
Attention!
The ground spring mentioned in the manual is not included with the P6100 probe, it is only included with the high voltage probes: P6150, P6200. The manual, however, covers the P6040, P6060, P6100, P6150, P6200 probes, which are listed on the first page of the manual.Note!
Before connecting the capacitor, it must be discharged. Connecting a charged capacitor may cause permanent damage to the measuring instrument.Data sheet
A 2-in-1 device that combines a digital oscilloscope with an LCR tester. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. Fnirsi DSO-TC2 Standard
Digital oscilloscope with two measurement channels. It offers a bandwidth of 100 MHz and a sampling rate of 1 GSa/s. Supplied with software that allows analysis of the tested signals on a PC in real time. Hantek DSO5102P
No product available!
4-channel digital oscilloscope with a built-in 16-channel logic analyzer and signal generator. It offers a frequency band of 100 MHz and sampling rates of up to 1 GS/s. It can work with Windows devices. Hantek DSO3104A
Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 1 MHz and a sampling rate of 40 MS/s. Equipped with a 2.4" colour display with a resolution of 320x240 pixels. ZEEWEI DSO154PRO
4-channel digital oscilloscope with signal generator connected to a PC via USB interface. It offers a frequency bandwidth of 100 MHz and samples up to 1 GS/s. It has numerous built-in functions and is easy to use. It can work with Windows computers. Hantek 6074BD
A 2-channel digital oscilloscope that connects to a computer via a USB interface. It offers a frequency bandwidth of 20 MHz and sampling up to 48 MS/s. Hantek 6022BE
Digital oscilloscope with two measurement channels equipped with a large TFT LCD screen with a touch panel. It offers a bandwidth of 200 MHz and a sampling rate of 1 GSa/s. Supplied with software that allows analysis of the tested signals on a PC in real time. Hantek DPO6202B
A digital-analog oscilloscope that allows users to measure, visualize, generate, record and control various types of circuits. It has two analog outputs (with a bandwidth of 50 MHz and 14-bit resolution), one analog output and 16 outputs/outputs. The device is equipped with BNC equipment and a solid aluminum housing. Digilent 410-417
Portable digital oscilloscope with built-in multimeter. It has two measurement channels with a bandwidth of 40 MHz and a sampling rate of 250 MSa/s. Hantek 2C42
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with a 120 MHz bandwidth and a single-channel signal generator. DSO3D12
No product available!
An 8-channel digital oscilloscope that connects to a computer via USB interface. It has a frequency bandwidth of 100 kHz and is equipped with more than 80 types of functions for automotive diagnostics. Hantek 1008B
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with 40 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek 2D42
4-channel digital oscilloscope offering a frequency band of 500 MHz and a sampling speed of up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO5004
No product available!
A 6-in-1 multifunctional measuring tool in the form of an extremely compact and portable device. It combines the functions of an oscilloscope, recorder, multimeter, spectrum analyzer, frequency counter and signal generator. Hantek DSO8102E
No product available!
Pocket-sized digital oscilloscope with 8MB memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display and signal generation function. MiniWare DS211
Handheld 1-channel digital oscilloscope connected to a computer via USB interface. It offers a frequency bandwidth of 20 MHz and samples up to 96 MS/s. Hantek PSO2020
A 6-in-1 multifunctional measuring tool in the form of an extremely compact and portable device. It combines the functions of an oscilloscope, recorder, multimeter, spectrum analyzer, frequency counter and signal generator. Hantek DSO8152E
No product available!
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3