Main view
search
  • Main view
ID: 1186427
zł1,329.00
Tax included

zł1,080.49 tax excl.

Digital oscilloscope with two measurement channels. It offers a bandwidth of 100 MHz and a sampling rate of 1 GSa/s. Supplied with software that allows analysis of the tested signals on a PC in real time. Hantek DSO5102P

24h
Available
Available quantity: 2
 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

Digital oscilloscope equipped with a 7" TFT LCD display with a resolution of 800 x 480 pixels with the ability to adjust the backlight brightness. It has two measurement channels and is characterized by good operating parameters, including a 100 MHz bandwidth, a sampling rate of 1 GSa/s and a 40K memory buffer. It has numerous built-in functions that facilitate signal analysis, including automatic setting, measurement of various voltage-time parameters, FFT analysis, operation in the X-Y mode, waveform recording and communication with a PC via the USB interface. It is a useful measurement tool widely used in various fields. such as communications, embedded systems, computers, research and education.

Features

Oscilloscope

  • Number of channels: 2
  • Sampling rate: 1GSa/s
  • Input coupling: DC, AC, GND
  • Input impedance: 1MΩ±2% ‖20pF±3pF
  • Probe attenuation factor: 1X, 10X, 100X, 1000X
  • Rated voltage: 300V CAT II
  • Maximum input voltage: 300VRMS (10X)
  • Horizontally
    • Waveform interpolation: (sin x)/x
    • Maximum recording length: 40K
    • Horizontal scale range: 4ns/div~40s/div
    • Zero offset: ±0.5 div x minimum time base gear
    • Sampling frequency and delay time measurement accuracy: ±50ppm
  • Vertically:
    • Frequency band: 100MHz
    • Rise time: 3.5 ns
    • Vertical resolution: 8 bits, each channel samples simultaneously
    • Vertical sensitivity: 2mV/div to 10V/div
    • Offset range ≥ 200mV/div, ±1V, ＜200mV/div ±50V
    • Mathematical operations: +, -, ×, ÷, FFT
    • FFT Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
    • Bandwidth limit: 20MHz
  • Trigger:
    • Trigger type: edge, pulse width, slope, timeout, window, pattern
    • Trigger level range: ±8 divisions from the center of the screen
    • Trigger mode: auto, normal, single
    • Hold range 100ns to 10s
  • Measurement
    • Voltage difference between cursors △V
    • Time difference between △T cursors
    • Reciprocal of △T, in hertz (1/△T)
    • Automatic measurement: frequency, period, average, peak-to-peak, RMS, minimum, mixmum, rise time, fall time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period average, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF

General parameters

  • TFT color LCD display with a diagonal of 7" and a resolution of 800 x 480 pixels with the ability to adjust the backlight brightness
  • Interface: USB Host，USB Device
  • Output voltage: 5Vpp input ≥1MΩ load
  • Frequency: 1kHz
  • Power Supply: 100-120VAC RMS(±10%), 45Hz to 440Hz, CATⅡ, 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
  • Power consumption: <30W
  • T-fuse, 3.15A, 250V, 5x20mm
  • Operating temperature: 0 to 50 °C
  • Dimensions 385 x 200 x 245 mm
  • Weight: 3500g

Kit contains

  • Oscilloscope
  • Test leads
  • USB cable
  • Power cord
1186427

Data sheet

Type of oscilloscope
Digital
Bandwidth
100 MHz
Sampling rate
1 Gsps
Memory depth
40 kpts
Number of channels
2

You might also like

Other products in the same category (16)